585960

Casio QV-770 Anleitung

1
Zoom out
Zoom in
Vorherige Seite
1/19
Nächste Seite
LCD Digital Camera
QV-770
Owner's Manual
英
If you need help with
your camera, please
call: 1(800)435-7732
CASIO COMPUTER CO.,LTD.
6-2, Hon-machi 1-chome
Shibuya-ku, Tokyo 151-8543, Japan
2
QUICK REFERENCE
• Be sure to use Alkaline or Lithium batteries. Never use manganese batteries.
• Press down on the battery compartment cover at the point marked AA
AA
A in the above illustration until the
cover locks into place with a click.
1
Slide the battery compartment
lock on the bottom of the camera
(11
11
1), and open the battery com-
partment cover (22
22
2). Load four batteries and close the battery compart-
ment cover.
2
To load batteries (page 16)
Be sure to load four AA size batteries that come with this camera before using it.
3
QUICK REFERENCE
To Record Images (page 20)
2
3
1
4
Slide the Function
Switch to REC. Slide the POWERSwitch
to the right to turn on the
camera.
Press    button to select resolution setting you want.
Each press of    button cycles through the resolution setting in the
following sequence:   (Fine)  (Normal)  (Economy).
Set the NORMAL/
MACRO switch to
  (NORMAL)
position.
Use (Macro) when
the subject is located
about 15 cm (about 6
inches ) from the lens
(see page 24).
•
•
5
Compose the image
on the monitor
screen and then
press the shutter
button.
4
QUICK REFERENCE
To Playback Images (page 33)
2
Slide the POWER Switch to the right.
• The image you recorded appears on the LCD.
3
Use [+] and [–] to scroll
through the images stored
in camera memory.
1
Slide the Function
Switch to PLAY.
The camera may contain pre-recorded demonstration images
when you purchase it. To delete these images, see page 5.
29
OTHER RECORDING FUNCTIONS
2.
Press MODE a number of
times until the screen
shown on the right hand
appears, which indicates
the Self-timer Recording
Mode.
3.
Press MENU.
4.
Use [+] and [–] to select the Self-timer Record-
ing Mode you want to use, and then press the
shutter button.
Self-timer Recording
There are three different Self-timer Recording Modes:
single, movie, and future.
• Single (SINGLE)
After about 10 seconds have elapsed, this mode records a
single image.
• Movie (MOVIE)
Starts movie recording 10 seconds after the shutter button
is pressed. See “Movie Recording” on page 27 for details
on movie recording.
• Future (FUTURE)
After about 10 seconds have elapsed, this mode records
the image in front of the lens the instant the shutter button
is pressed, along with four subsequent images.
IMPORTANT!
The flash fires only when SINGLE is selected.
1.
Slide the Function Switch to REC.
Self-timer
Recording Mode
30
OTHER RECORDING FUNCTIONS
Panorama Recording
With panorama recording you record a series of images and
then link them to create a single panoramic effect.
1.
Slide the Function Switch to REC.
2.
Press MODE a number of
times until the screen
shown on the right hand
appears, which indicates
the Panorama Recording
Mode.
5.
Compose the image on the monitor screen and
then press the shutter button to start the
record operation.
• A 10-second countdown starts on the LCD. The shut-
ter will release automatically when the end of the
countdown is reached.
• To cancel ongoing Self-Timer operation, press shutter
button.
NOTE
During self-timer recording, you may find it helpful to
rotate the swivel lens mechanism 180 degrees so the
monitor screen faces the same direction as the lens.
This way you can always see how much time is left until
the start time is reached and recording begins.
Panorama
Recording Mode
31
OTHER RECORDING FUNCTIONS
Manual Recording
With this operation you manually set the aperture and white
balance to the settings you want to use in order to produce
special effects or to compensate for special conditions.
• You can override automatic settings and manually set ex-
posure and white balance to create exactly the effects you
want for your images.
Aperture
You can select AUTO, F2, or F8 as the aperture setting. F8
allows recording of a wider area (NORMAL Mode: 0.3m ~ ∞
(11.8" ~ ∞), MACRO Mode: 11 ~ 26cm (4.3" ~ 10.2")).
White Balance
This settings lets you adjust white areas to produce a more
natural-looking image.
WB1
WB1 .... Use this setting when indoor lighting is making
the image appear reddish.
WB2 .... Use this setting when indoor lighting is making
the image appear bluish.
WB3
WB3 .... Use this setting for outdoor recording.
3.
Compose the image on the monitor screen and
then press the shutter button to record.
• The left edge of the previous image you recorded re-
mains on the monitor screen, so you can use it to com-
pose the next image correctly.
• Up to nine images can be grouped into a panorama.
Press MENU when you want to stop a panorama re-
cording operation.
• If you want to link more than 9 images into a pan-
orama, upload the images to a computer and use your
computer application to link them.
• Aperture and white balance settings are locked when
you record the first image of a panorama, and these
settings are applied to all subsequent images in that
panorama.
• See “Panorama Playback” on page 35 for details on
playing back panoramas.
• Panorama images that are uploaded to a personal
computer and then downloaded back to the camera
cannot be played back using panorama playback.
WB2
32
OTHER RECORDING FUNCTIONS
1.
Slide the Function Switch to REC.
2.
Press MODE a number of
times until the screen
shown on the right hand
appears, which indicates
the Manual Recording
Mode.
3.
Press MENU.
4.
Use [+] and [–] to select
the aperture (APT) set-
ting you want to use, and
then press the shutter
button.
5.
Use [+] and [–] to select the white balance (WB)
setting you want to use, and then press the
shutter button.
• The indicator is in the upper left corner of the dis-
play screen.
• Manual settings you make remain in effect until you
turn off power or change to another mode.
6.
Compose the image on the monitor screen and
then press the shutter button to record.
• The image is recorded using the aperture and white
balance settings you made above.
• To return the aperture and white balance settings to
their default (AUTO) settings, turn off the camera or
select normal recording again and set the aperture
(APT) and white balance (WB) both to AUTO.
Manual Recording Mode
1 …

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Casio QV-770 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info