Bedienungsanleitung Casio QW3475 - GBD-H1000 G-SQUAD (Seite 46 von 58) (Englisch)

740165

Zoom out

Zoom in

Vorherige Seite

1/58

Nächste Seite

5. Use (A) and (D) to move the pointer to

[DST].

6. Press (C).

7. Use (A) and (D) to select a summer time

setting.

[AUTO]

The watch switches between

standard time and summer time

automatically.

[OFF]

The watch always indicates

standard time.

[ON]

The watch always indicates

summer time.

8. Press (C) to complete the setting

operation.

After the setting operation is complete,

[SETTING COMPLETED] will appear for

a few seconds, and then the World Time

setting screen will re-appear.

9. Press (E) twice to exit the setting screen.

Note

●

The initial factory default summer time

setting for all cities is [AUTO]. In many

cases, [AUTO] lets you use the watch

without switching manually between

summer time and standard time.

●

While [UTC] is selected as the city, you

will not be able to change or check the

summer time setting.

Alarms

The watch performs a sound and/or vibration

operation when an alarm time is reached. You

can set up to four different alarms.

●

Sound and/or vibration operations are not

performed in the cases below.

ー　

While the battery indicator is [CHG] or

lower

ー　

When watch is at Level 2 power saving

Power Saving Function

●

When snooze is enabled for an alarm, it will

sound every five minutes up to seven times.

Configuring Alarm Settings

1. Enter the Timekeeping Mode.

Navigating Between Modes

2. Hold down (A) for at least two seconds.

This displays the Timekeeping Mode

setting screen.

Pointer

3. Use (A) and (D) to move the pointer to

[ALARM].

4. Press (C).

5. Use (A) and (D) to move the pointer to the

alarm you want to set.

6. Press (C).

7. Use (A) and (D) to select an alarm and

snooze function ON/OFF setting.

[OFF]

Disables alarms, disables

snooze.

[ON]

Enables alarms, disables

snooze.

[ON (SNZ)]

Enables alarms, enables

snooze.

●

The currently selected setting will be

indicated by a check mark ( ) to the

left.

8. Press (C).

9. Use (A) and (D) to set the alarm hour.

10. Press (C).

11. Use (A) and (D) to set the alarm minute.

12. Press (C).

13. Use (A) and (D) to select whether or not

you want to save your current settings.

[YES] Saves current settings.

[NO] Discards current settings.

[RETURN]

Returns to the alarm setting

screen.

14. Press (C) to complete the setting

operation.

After the setting operation is complete,

[SETTING COMPLETED] will appear for

a few seconds, and then the alarm setting

selection screen will re-appear.

●

Turning on an alarm causes to

appear on the display to the right of the

time setting. If snooze is enabled, [SNZ]

also appears.

15. Press (E) twice to exit the setting screen.

Note

●

To exit the alarm setting operation at

any point, press (E) and advance to

step 13.

●

To stop a sounding alarm

While an alarm sound and/or vibration

operation is being performed, press any

button to stop it.

Note

●

When snooze is enabled for an alarm,

alarm sound and/or vibration will

repeat every five minutes, up to seven

times. To stop an alarm’s ongoing

snooze operation, turn off the alarm.

Operation Guide 3475

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Casio QW3475 - GBD-H1000 G-SQUAD Seite 46

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info