Bedienungsanleitung Casio QW5526 - MRG-B1000D G-shock (Seite 10 von 21) (Englisch)

740164

Zoom out

Zoom in

Vorherige Seite

1/21

Nächste Seite

Hold down (C) for about 2 seconds.

This will cause the watch to enter the

Timekeeping Mode.

Hold down the (B) button for about 3.5

seconds until the second hand points to

[C].

When a connection is established

between the watch and phone, then the

phone’s ringtone will sound.

●

It will take a few seconds before the

phone tone sounds.

Press any button to stop the tone.

●

You can press any watch button to stop

the phone tone only during the first 30

seconds after it starts to sound.

Configuring Watch Settings

You can use MR-G Connected to specify the

amount of time until the Bluetooth connection

is automatically terminated and the

illumination duration, and to configure other

settings.

Tap the “MR-G Connected” icon.

Hold down the (C) button for about 3.5

seconds.

This causes the second hand to move to

[C] and establishes a connection between

the watch and phone.

Select the setting you want to change

and then perform the operation shown on

the phone screen.

Changing the Home City

Summer Time Setting

Tap the “MR-G Connected” icon.

Hold down the (C) button for about 3.5

seconds.

This causes the second hand to move to

[C] and establishes a connection between

the watch and phone.

Perform the operation shown on the

phone screen to change your World Time

summer time setting.

Checking the Watch Charge

Level

Use the procedure below to check the current

charge level with MR-G Connected.

Tap the “MR-G Connected” icon.

Hold down the (C) button for about 3.5

seconds.

This causes the second hand to move to

[C] and establishes a connection between

the watch and phone.

Use MR-G Connected to check the

charge level.

Connection

Connecting with a Phone

This section explains how to establish a

Bluetooth connection with a phone that is

paired with the watch.

●

If the watch is not paired with the phone you

want to connect with, refer to the information

below and pair them.

Pair the watch with a phone.

Move the phone close to (within one meter

of) the watch.

While the second hand is not pointing to

[C], hold down the (C) button for about 3.5

seconds.

This causes the second hand to move to

[C] and establishes a connection between

the watch and phone.

Important!

●

If you have problems establishing a

connection, it could mean that MR-G

Connected is not running on the

phone. On the phone’s home screen,

tap the “MR-G Connected” icon. After

the app starts up, hold down the

watch’s (C) button for about 3.5

seconds.

Note

●

The connection will be terminated if

you do not perform any operation on

the watch or phone for a fixed amount

of time.

To specify the connection limit time,

perform the following operation with

MR-G Connected: “Watch settings”

“Connection time”. Next, select a

setting of 3 minutes, 5 minutes, or 10

minutes.

Operation Guide 5526

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Casio QW5526 - MRG-B1000D G-shock Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info