Bedienungsanleitung Casio WK-1600 (Seite 22 von 96) (Englisch)

586840

Zoom out

Zoom in

Vorherige Seite

1/96

Nächste Seite

E-20

Using the PITCH BEND Wheel

As its name suggests, the PITCH BEND wheel lets you “bend” the

pitch of a sound. This makes it possible to add a touch of realism to

saxophone and other tones.

To use the PITCH BEND wheel

While holding down a keyboard key with your right hand,

use your left hand to rotate the PITCH BEND wheel up and

down.

• Releasing the PITCH BEND wheel returns the note to its original

pitch.

❚

NOTES

❚

• With saxophone and electrical guitar tones, the most realistic sounding

effects can be produced if you play notes and operate the PITCH BEND

wheel simultaneously.

• See “Pitch Bend Range (Initial Default: 02)” on page E-59 for changing

the bend range of the PITCH BEND wheel.

• Never turn on keyboard power while the PITCH BEND wheel is rotated.

Using the MODULATION Wheel

Modulation applies vibrato, which modulates the pitch of a note. It

works best with notes that are sustained (held) by keeping a key-

board key held down, especially when playing the melody with a

violin or other similar tone.

To use the MODULATION Wheel

While playing melody notes with your right hand, rotate

the MODULATION wheel with your left to apply vibrato

to the notes.

• The amount of vibrato applied depends on how far you rotate the

MODULATION wheel upwards. Setting the wheel to its neutral

position (rotated as far downwards as it can go) turns vibrato off.

❚

NOTES

❚

• Modulation can be used to add greater expression to sustained melody

notes being played using a violin, synthetic reed, or other similar tone.

• Modulation affects different tones in different ways.

733A-E-022A

AMPENVELOPE

00 FLAT

01-17 VIBRATO

18-45 OTHERS

DECAY

SUSTAIN

PITCHENVELOPE

MIN

MAX

FULL RANGE

CHORD

CASIO CHORD

SONG

FINGERED

PATT E RN

EXTERNAL

INTERNAL

UPPER1

CH 1

UPPER2

CH 2

LOWER1

CH 3

LOWER2

STOREBANK

CH 4

ACC VOL.

CH 5

CHORD1

CH 6

CHORD2

CH 7

CHORD3

CH 8

BASS

CH 9

RHYTHM

CH 10

TR1

CH 11

TR2

CH 12

TR3

CH 13

TR4

CH 14

TR5

CH 15

TR6

CH 16

789

456

PARAMETER RESET:

DELETE

/YESS/NO

MAIN MANU/

CHANNEL VOLUME:

SUB MANU/

CHANNEL SELECT:

–]

Turning DSP Effects On and Off

You can turn the currently selected DSP effect on and off by pressing

the DSP button.

• The current DSP effect’s on/off status is indicated on the display

by the

indicator. The digital effect is on while this indicator

is displayed, and off when it is not displayed.

• Press the DSP button to toggle the currently selected digital effect

on and off.

To turn the DSP effect on and off

Press the DSP button.

• This causes one of the two digital effect screens shown be-

low to appear.

When the current digital effect is turned on

When the current digital effect is turned off

• The above screens clear if you do not perform any operation

within about five seconds.

While a digital effect screen is on the display, use the

[+] and [–] buttons to scroll through the digital ef-

fects, until the one you want is displayed.

❚

NOTES

❚

• Playing a demo tune (page E-8) automatically changes the effect to the

one that is assigned to the tune. You cannot change or cancel a demo

tune effect.

• Changing the effect setting while sound is being output by the keyboard

causes a slight break in the sound when the effect changes.

• The DSP effect is applied not only to the notes you play on the key-

board, but also to rhythms and Auto Accompaniment patterns. Note that

effects 3 through 6, and effect 8 can produce a mood that is not suitable

for certain types of music when they are applied to rhythms and Auto

Accompaniment. When this happens, you can turn off application of the

effect to the rhythm and Auto Accompaniment by using the Mixer to set

the effect send volume of the accompaniment channel to zero. For de-

tails on the actual procedure for doing this, see “Changing the Parame-

ters of a Channel” on page E-30.

• Setting the keyboard’s MAIN VOLUME slider to high volume when Ef-

fect 9 (EQ Loudness) is being applied can cause distortion for certain

tones and rhythm patterns. When this happens, lower the MAIN VOL-

UME setting.

Indicates effect is turned on

Effect number and name

WK-1800/1600(E)-16~20 03.7.31, 5:20 PMPage 20 Adobe PageMaker 6.5J/PPC

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Casio WK-1600 Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info