Bedienungsanleitung Casio WK-1630 (Seite 56 von 96) (Englisch)

586841

Zoom out

Zoom in

Vorherige Seite

1/96

Nächste Seite

E-54

Octave Shift

When using the piccolo tone, there may be cases when very high notes

you want to play are not included within the range of the keyboard.

When this happens, you can use octave shift to shift the keyboard

range one octave up. In this case you can use octave shift to shift the

range of the tone up or down.

Note that octave shift is available with the Pattern Sequencer only.

Use [+] and [–] to select the octave shift setting you want.

-1: Range shifted one octave down.

0: No shift

1: Range shifted one octave up.

Work Area Clear

Use this operation to clear Pattern Sequencer work area contents. You

must clear the work area when you plan to create an original accom-

paniment pattern from scratch.

In the Global menu, use [왗 ] and [왘] to display the

“Work Del” screen, and then press the [+] and [–]

buttons at the same time.

• This message confirms whether or not you really what to

clear work area contents.

Press YES to clear work area contents or NO to abort

the clear operation without clearing anything.

• The message shown below appears for about one second and

then the display returns to the Global menu.

––––

733A-E-056A

Setting

3 / 8

5 / 8

6 / 8

7 / 8

9 / 8

Setting

2 / 4

3 / 4

4 / 4 (initial value)

5 / 4

6 / 4

7 / 4

Meter (Beat)

This setting specifies the meter of the accompaniment pattern.

The display shown here appears when you specify a meter that is not

included in the table below.

IMPORTANT!

You can set the meter immediately after clearing the Pattern Se-

quencer work area only (see above). In other cases, the meter of the

accompaniment pattern currently in the work area is used, and can-

not be changed. In this case the display does not flash.

• Use [+] and [–] to change the setting.

Tempo

This setting specifies the initial tempo value for the accompaniment

pattern.

• Use [+] and [–] to set the initial tempo value within the range of

030 to 255.

• If the accompaniment pattern is playing when you change this set-

ting, the tempo of the pattern does not change immediately. The

value you specify becomes the current pattern’s default tempo val-

ue, so you need to press both TEMPO buttons at the same time to

have the newly set tempo take effect for an ongoing pattern.

❚

NOTE

❚

When you turn on the Pattern Sequencer, the initial default tempo

value of the accompaniment pattern you are using as a base is ap-

plied first.

AMPENVELOPE

00 FLAT

01-17 VIBRATO

18-45 OTHERS

DECAY

SUSTAIN

PITCHENVELOPE

MIN

MAX

FULL RANGE

CHORD

CASIO CHORD

SONG

FINGERED

PATTERN

EXTERNAL

INTERNAL

UPPER1

CH 1

UPPER2

CH 2

LOWER1

CH 3

LOWER2

STOREBANK

CH 4

ACC VOL.

CH 5

CHORD1

CH 6

CHORD2

CH 7

CHORD3

CH 8

BASS

CH 9

RHYTHM

CH 10

TR1

CH 11

TR2

CH 12

TR3

CH 13

TR4

CH 14

TR5

CH 15

TR6

CH 16

789

456

PARAMETER RESET:

DELETE

/YESS/NO

MAIN MANU/

CHANNEL VOLUME:

SUB MANU/

CHANNEL SELECT:

–] (YES/NO

)

WK-1800/1600(E)-48~57 03.7.31, 5:21 PMPage 54 Adobe PageMaker 6.5J/PPC

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Casio WK-1630 Seite 56

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info