Bedienungsanleitung Casio WK-1630 (Seite 76 von 96) (Englisch)

586841

Zoom out

Zoom in

Vorherige Seite

1/96

Nächste Seite

E-74

Disk Drive Error Messages

733A-E-076A

Err ReadOnly

Err Format

Err Disk R/W

Err DiskFull

Err Mem Full

Err Not SMF0

Err No Disk

Err No File

Err Protect

Err Convert

Err WrongDat

Attempt to save a file using the same

name as an existing file that is read

only.

1. The format of the diskette is not

compatible with this keyboard.

2. The diskette is not formatted.

3. The diskette is damaged.

The diskette is damaged.

The diskette is full.

Keyboard memory became full while

importing data from diskette.

The file you are reading is not an SMF

0 format file.

1. The diskette is not loaded in the

drive correctly.

2. No diskette is loaded in the drive.

The keyboard cannot find any file it can

read on the diskette.

The diskette is write protected.

The accompaniment pattern data you

are trying to convert is of a type that

cannot be converted by this keyboard.

The data on the diskette is corrupted.

Save the new file to a different diskette or use another

name.

1. Change to a diskette that has the proper format.

................................................................................E-67

2. Format the diskette. ............................................. E-73

3. Use a different diskette.

Use a different diskette.

1. Use a different diskette.

2. Delete any files you no longer need in order to make

room for the data you want to save. .................E-73

1. If you have user patterns stored in Pattern Sequenc-

er memory, use the following procedure to delete

user patterns you no longer need from the user area

(patterns 120 to 129).

1 Clear the work area using the procedure under

“Work Area Clear” on page E-54.

2 While the work area empty (cleared), use the pro-

cedure under “To exit the Pattern Sequencer

Mode and save work area contents” on page E-

56 to save the work area to the accompaniment

pattern user area accompaniment numbers that

contain patterns you no longer need. Saving the

empty work area effectively deletes data currently

stored in memory.

2. If you have song data stored in Song Sequencer

memory (SG0, SG1), delete the song data you no

longer need. ..........................................................E-46

Use SMF 0 format files only. ...................................E-69

1. Eject the diskette from the drive and reload it.

................................................................................E-68

2. Load a diskette into the drive.

Use a diskette that contains data stored by this key-

board or compatible data from another device.

1. Use a different diskette.

2. Close the diskette’s write protect hole to enable data

storage. .................................................................. E-67

Try converting other accompaniment pattern data.

Use other data or another diskette.

Message

Cause Action

WK-1800/1600(E)-67~74 03.7.31, 5:22 PMPage 74 Adobe PageMaker 6.5J/PPC

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Casio WK-1630 Seite 76

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info