Bedienungsanleitung Casio WK-210 (Seite 26 von 75) (Englisch)

586839

Zoom out

Zoom in

Vorherige Seite

1/75

Nächste Seite

Sampling Sounds and Playing Them on the Digital Keyboard

E-24

■ To change the pitch of a sampled sound

While holding down the keyboard key of the sampled sound

whose pitch you want to change, use the

(10-key) [–] and

[+] keys to change the pitch.

• You can change the pitch within a range of –64 to 63

semitones.

■ To delete a keyboard key’s sampled sound

While holding down the keyboard key whose sound you want

to delete, press

. In response to the “DelSure?” message

that appears, press the

(10-key) [+] button to delete, or [–]

to cancel the delete operation.

• Deleting a sampled sound will return the key to its initial

default built-in sound.

Example: To delete the sound assigned to key D4

Use the following procedure to change the rhythm part of an

Auto Accompaniment pattern to a drum set sound that you

sampled.

Press

and then use

(10-key) to enter the

rhythm number of the Auto Accompaniment

pattern you want.

You cannot use a Drum Sampling Tone in a user rhythm,

so do not select a user rhythm in the above step.

Press

and then use

(10-key) to enter the

tone number of the sampling drum set that

contains the sound you want to use.

Press

This changes the rhythm part of the Auto Accompaniment

pattern you selected in step 1 to the sampled sound you

selected in step 2.

• To change the Auto Accompaniment rhythm part back

to its original sound, press

again.

• Some rhythm part drum sounds cannot be replaced by

sampled sounds.

Normally when the Digital Keyboard is in sampling standby, it

will start sampling automatically whenever it detects sound

input. You can use the following procedure to enable manual

sampling start, which will cause sampling to wait until you

press a button to start it. You can use this to insert silence

before the sampled sound.

Press

and then use the

(10-key) [4] (o)

and [6] (p) keys to display “SAMPLING” (page

E-6).

Press the

(10-key) [7] (ENTER) key.

Press the

(10-key) [–] key to turn off

automatic sampling start.

This enables manual sampling start, which operates as

described below.

• Melody sampling (page E-20):

Sampling starts when you release

, which you press

in step 2 of the sampling procedure.

• Drum sampling (page E-22):

Sampling starts when you release the Digital Keyboard

key you press in step 4 of the sampling procedure.

• When manual sampling start is enabled, sampling

starts when you release

or the keyboard key, not

when you press it. Sampling does not start if you hold

down the button or key.

Using a Drum Sampling Tone in Auto

Accompaniment (Drum Assign)

Disappears

Other Sampling Functions

Changing to a Manual Sampling Start

S A M P L I N G

Flashes

A u t o S t r t

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Casio WK-210 Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Casio WK-210

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info