Bedienungsanleitung Casio WK-220 (Seite 67 von 77) (Englisch)

466804

Zoom out

Zoom in

Vorherige Seite

1/77

Nächste Seite

English

Reference

E-65

The metronome does not sound. • Check and adjust the accompaniment volume setting (page E-42).

• Check and adjust the song volume (page E-30).

• Turn power off and then back on to initialize all Digital Keyboard

settings (page E-10).

Notes keep sounding, without stopping. • Turn power off and then back on to initialize all Digital Keyboard

settings (page E-10).

• Replace the batteries with new ones or switch over to AC adaptor

power (page E-9).

Some notes are cut off while they are playing. Notes are cut off whenever the number of notes being sounded

exceeds the maximum polyphony value of 48 (24 for some tones).

This does not indicate malfunction.

The volume or tone setting I made has changed. • Adjust the volume setting (page E-10).

• Turn power off and then back on to initialize all Digital Keyboard

settings (page E-10).

• Replace the batteries with new ones or switch over to AC adaptor

power (page E-9).

Output volume does not change even though is

change my keyboard touch.

• Change the Touch Response setting (page E-12).

• Turn power off and then back on to initialize all Digital Keyboard

settings (page E-10).

In certain keyboard ranges, the volume and tone

quality sound are slightly different from those in other

keyboard ranges.

This is due to system limitations. It does not indicate malfunction.

With some tones, octaves do not change at the far

ends of the keyboard.

This is due to system limitations. It does not indicate malfunction.

The pitch of the notes does not match other

accompanying instruments or sounds strange when

played long with other instruments.

• Check and adjust the transpose (page E-17) and tuning settings

(page E-17).

• Turn power off and then back on to initialize all Digital Keyboard

settings (page E-10).

The reverb of notes seems to change suddenly. • Check and adjust the reverb setting (page E-16).

• Turn power off and then back on to initialize all Digital Keyboard

settings (page E-10).

Operation

When I perform a skip forward or skip back

operation, the skip operation moves multiple song

measures instead of only a single measure.

While song playback is stopped or a Step Up Lesson is in progress,

skip forward and skip back operations are performed in phrase units

(page E-28).

Tone, rhythm, and other settings revert to their initial

defaults whenever you turn on the Digital Keyboard.

Though Digital Keyboard settings reset when you turn off the Digital

Keyboard, you can save setups to registration memory for instant

recall whenever you need them (page E-48).

Computer Connection

I can’t exchange data between the Digital Keyboard

and a computer.

• Check to make sure that the USB cable is connected to the Digital

Keyboard and computer, and that the device is selected correctly

with your computer’s music software settings (page E-59).

• Turn off the Digital Keyboard and then exit the music software on

your computer. Next, turn the Digital Keyboard back on and then

restart the music software on your computer.

Symptom Action

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Casio WK-220 Seite 67

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Casio WK-220

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info