Bedienungsanleitung Casio WK-3800 (Seite 22 von 108) (Englisch)

466898

Zoom out

Zoom in

Vorherige Seite

1/108

Nächste Seite

E-20

Basic Operations

To select a tone

Find the tone you want to use in the tone list (the

separate

Appendix

A) and note its tone number.

Press the TONE button.

Use the number buttons to input the three digit tone

number for the tone you want to select.

Example: To select “432 GM ACOUSTIC BASS”, input

4, 3 and then 2.

NOTE

•Always input all three digits for the tone number,

including leading zeros (if any).

•You can also increment the displayed tone number by

pressing [+] and decrement it by pressing [–].

•When one of the drum sets is selected (tone numbers

600 through 619), each keyboard key is assigned a

different percussion sound. See the separate

Appendix

B for details.

Polyphony

The term polyphony refers to the maximum number of notes

you can play at the same time. The keyboard has 32-note

polyphony, which includes the notes you play as well as the

rhythms and auto-accompaniment patterns that are played

by the keyboard. This means that when a rhythm or auto-

accompaniment pattern is being played by the keyboard, the

number of notes (polyphony) available for keyboard play is

reduced. Also note that some of the tones offer only 10-note

polyphony.

BsGsuAco

Changing Tones and Configuring

DSP Effect Settings

This keyboard has only a single DSP sound source. Because

of this, selecting tones for which DSP is enabled for multiple

parts when layering or splitting tones (pages E-66, 67) can

cause conflicts. To avoid conflicts, DSP is allocated to the last

DSP enabled tone, and DSP is disabled (DSP line OFF) for all

other parts.

DSP line is a parameter that controls whether or not the

currently selected DSP effect is applied to a part.* Each tone

has a DSP line parameter. Selecting a tone for a part applies

the tone’s DSP line parameter setting to all parts.

* The DSP line parameter is turned on (DSP effect is applied)

for the 400 Advanced Tones numbered 000 through 399,

and turned off (DSP effect not applied) for the 200 preset

tones from 400 to 599. For information about other tones,

see “Tone Types” on page E-19.

PIANO SETTING Button

Pressing this button changes the setup of the keyboard to

optimize it for piano play.

Settings

Tone Number: “000”

Rhythm Number: “140”

Accompaniment Mode: Normal

Layer: Off

Split: Off

Auto Harmonize: Off

Transpose: 0

Touch Response:

Off: Returns to initial default

On: No change

Assignable Jack: SUS

Local Control: On

Mixer Channel 1 Parameter Setup: Depends on tone

To optimize keyboard settings for

piano play

Press the PIANO SETTING button.

Now try playing something on the keyboard.

•The notes you play will sound with a piano tone.

•If you want to play with rhythm accompaniment,

press the START/STOP button. This causes a rhythm

that is optimized for piano will start to play.

•To stop rhythm play, press the START/STOP button

again.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Casio WK-3800 Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Casio WK-3800

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info