466898
80
Zoom out
Zoom in
Vorherige Seite
1/108
Nächste Seite
E-78
Using the SMF Player
Configuring Other Settings
To configure other settings
1
While playback is stopped, select the file you want
to play back.
Perform steps 1 through 3 under To play back an
SMF to select a file.
2
Press the [] CURSOR button to display a screen
for selecting the part you want to play on the
keyboard (play along part).
Use the [] and [] CURSOR buttons, the [+] and []
buttons, or the number buttons to select the play along
part.
You can specify the part you want to play on the
keyboard (the play-along part) as a value in the range
of 1 through 16.
After specifying a part, turn off the channel that
corresponds to the play-along part you selected. See
Turning Channels On and Off on page E-40 for more
information. Performing this step turns off the
applicable part so you can play it on the keyboard
along with the rest of the SMF playback.
NOTE
Entering the SMF Player Mode initializes all parts by
turning on all Mixer Mode channels.
3
Press the [] CURSOR button to display the
playback mode selection screen. Use the [] and
[] CURSOR buttons or the [+] and [] buttons to
select the playback mode.
You can select from among the following four playback
modes.
S1 : One file, one time
SL : One file, repeat
A1 : All files, one time
AL : All files, repeat
4
Press the [] CURSOR button to display the output
mode selection screen.
Use the [] and [] CURSOR buttons or the [+] and
[] buttons to select the output mode.
You can select from among the following two output
types.
int : Keyboards built-in speakers
out : USB port
NOTE
Layer, split, and Auto Harmonize are automatically turned
off in the SMF Player Mode.
3
Press the [] CURSOR button to display the file
selection screen.
SMFs are those shows file names end with the
extension MID. An error message appears at this
time if there are no SMF files currently in external
storage media you are using.
4
Use tthe number buttons to input the three-digit
file number of the file you want to play.
The name of the currently selected file will appear in
the text area of the display. The file number is shown
in the number area of the display. The Tempo/
Measure area of the display shows the size of the file
in kilobytes.
You can also use the [] and [] CURSOR buttons or
[+] and [] buttons to change the file.
5
Press the START/STOP button
This starts playback of the selected file.
You can use the TEMPO buttons to adjust the tempo
within the range of 30 to 255.
You can use the CHANNEL buttons to turn channels
1 through 16 on and off, regardless of whether file
playback is in progress or stopped. For more
information, see Turning Channels On and Off on
page E-40.
6
To stop file playback, press the START/STOP button
again.
Adjusting SMF Playback Volume
The following procedure explains how to control the overall
volume of SMF data playback. You can adjust volume while
playback is stopped or ongoing.
1
Press the ACCOMP VOLUME button.
This causes the SMF Vol. indicator to appear on the
display, along with a value that indicates the current
SMF volume setting.
2
Use the [+] and [] buttons or the number buttons
to adjust the SMF volume.
You can specify a setting in the range of 000
(minimum) to 127 (maximum).
Pressing [+] and [] at the same time returns the SMF
volume setting to 100.
Note that this setting does not affect the volume of
the notes you play on the keyboard.
80

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Casio WK-3800 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Casio WK-3800

Casio WK-3800 Bedienungsanleitung - Deutsch - 108 seiten

Casio WK-3800 Bedienungsanleitung - Holländisch - 108 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info