Bedienungsanleitung Casio WK-6500 (Seite 124 von 132) (Englisch)

466818

124

Zoom out

Zoom in

Vorherige Seite

1/132

Nächste Seite

Reference

E-122

08: Flanger

Applies wildly pulsating and metallic reverberation to sounds.

LFO waveform is selectable.

Parameters and Value Ranges:

1 :LFO Rate (0 to 127)

Adjusts the LFO rate.

2 :LFO Depth (0 to 127)

Adjusts the LFO depth.

3 :LFO Waveform (sin, tri, random)

Selects the LFO waveform.

4 :Feedback (0 to 127)

Adjusts the strength of feedback.

09: Chorus

Gives sounds depth and breadth. Chorus type is selectable.

Parameters and Value Ranges:

1 :LFO Rate (0 to 127)

Adjusts the LFO rate.

2 :LFO Depth (0 to 127)

Adjusts the LFO depth.

3 :LFO Waveform (sin, tri)

Selects the LFO waveform.

4 :Feedback (0 to 127)

Adjusts the strength of feedback

5 :Type (mono, stereo, tri)

Selects the chorus type.

10: Delay

Delays the input signal and feeds it back to create a repeating

effect and give sounds more breadth.

Parameters and Value Ranges:

1 :Delay Time (0 to 127)

Adjusts the delay time.

2 :Feedback (0 to 127)

Adjusts the repeat of the delay.

3 :Ratio Lch (0 to 127)

Adjusts the delay time of the left channel. This value is a

ratio of the value specified for Delay Time.

4 :Ratio Rch (0 to 127)

Adjusts the delay time of the right channel. This value is a

ratio of the value specified for Delay Time.

5 :Wet Level (0, 1, 2, 3, 4, 5)

Adjusts the level of the delay sound.

6 :Type (1, 2)

Selects the delay type.

Important!

When adjusting the delay time and type, certain settings can

result in a switching sound in the delay.

11: Reflection

An effector that extracts early reflections from reverb. Applies

acoustic presence to sounds.

Parameters and Value Ranges:

1 :Type (1, 2, 3, 4, 5, 6, 7, 8)

Selects from among the eight available reflection patterns.

2 :Feedback (0 to 127)

Adjusts the repeat of the reflected sound.

12: Rotary

This is a rotary speaker simulator.

Parameters and Value Ranges:

1 :Overdrive Gain (0, 1, 2, 3)

Adjusts overdrive gain.

2 :Overdrive Level (0 to 127)

Adjusts the overdrive output level.

3 :Speed (Slow, Fast)

Switches the speed mode between fast and slow.

4 :Brake (Rotate, Stop)

Stops speaker rotation.

5 :Fall Acceleration (0 to 127)

Adjusts acceleration when the speed mode is switched

from fast to slow.

6 :Rise Acceleration (0 to 127)

Adjusts acceleration when the speed mode is switched

from slow to fast.

7 :Slow Rate (0 to 127)

Adjusts the speaker rotation speed in the slow speed

mode.

8 :Fast Rate (0 to 127)

Adjusts the speaker rotation speed in the fast speed

mode.

13: Ring Modulator

Multiplies the input signal with an internal oscillator signal to

create a metallic sound.

Parameters and Value Ranges:

1 :OSC Frequency (0 to 127)

Sets the reference frequency of the internal oscillator.

2 :LFO Rate (0 to 127)

Adjusts the LFO rate.

3 :LFO Depth (0 to 127)

Adjusts the LFO depth.

4 :Type (1, 2, 3)

1 :Delay repeat determined by Delay Time.

2 :Delay repeat determined by Delay Time and Ratio L/R.

1 :Outputs the ring modulated signal only.

2 :Outputs the ring modulated signal and the input signal.

3 :Outputs a signal with a chorus effect applied to 2 (ring

modulated signal and input signal).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Casio WK-6500 Seite 124

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Casio WK-6500

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info