Bedienungsanleitung Casio WK-6600 (Seite 32 von 132) (Englisch)

522439

Zoom out

Zoom in

Vorherige Seite

1/132

Nächste Seite

Using Auto Accompaniment

E-30

Edit the selected accompaniment pattern

instrument part as desired.

• While performing the procedure below, you can press

the L-16 (START/STOP) button and perform repeat

playback of only the accompaniment pattern you are

editing. Each press of the L-16 (START/STOP) button

starts or stops playback.

• Performing rhythm assignment in step (1) above also

will automatically change mixer settings to the initial

defaults for the assigned rhythm. Because of this,

changing the rhythm after configuring mixer settings in

step (2) will cause the configured mixer settings to be

replaced with the default settings of the newly selected

rhythm.

• When intro or ending is selected as the

accompaniment pattern, the same rhythm is always

assigned to all eight instrument parts. Because of this,

performing rhythm assignment in step (1) for an intro

or ending will change the rhythm of all instrument parts

at one time.

Repeat steps 3 through 5 to edit other

accompaniment patterns and instrument parts.

After editing is complete, adjust the tempo of

the rhythm as desired.

• The tempo you set here becomes the initial default

tempo.

To save a rhythm after you edit it, hold down

the R-13 (FUNCTION) button as you press the

C-13 (MENU) button.

• This displays the rhythm editor menu with the 0

located at “Store”.

(1) While [RHYTHM] is displayed in line three of the

rhythm editor screen, specify a number to assign a

rhythm to the instrument part of the selected

accompaniment pattern.

Settings are configured using the same procedures

as those for rhythm selection. Perform steps 1, 2,

and 3 under “Playing an Auto Accompaniment” on

page E-24.

(2) Configure the mixer settings of the selected

accompaniment pattern instrument part as desired.

Press the C-5 (MIXER) button, use the R-17 (t,

y) buttons to select one of the items described in

the table below, and then use the dial or R-14 (–, +)

buttons to change the setting.

Display: Item

name Description Setting Range

TONE: Part Tone Specifies the

instrument part

tone setting.

All tones (except

user tones)*1

Part: Part On/Off*2Specifies whether

or not the

instrument part

should sound.

on: Sounds the

part.

oFF: Mutes the

part.

Volume: Part

Volume

Specifies the

instrument part

volume.

000 to 127

Pan: Part Pan Specifies whether

the sound of the

part can be heard

from the left side or

right side.

–64 to 0 to +63*3

Rev.Send: Part

Reverb Send

Specifies the level

of reverb (page

E-34) applied to an

instrument part.

000 to 127

Cho.Send: Part

Chorus Send

Specifies the level

of chorus (page

E-34) applied to an

instrument part.

000 to 127

*1 Only drum set sounds (tone numbers K:129 through

K:145) can be selected for drum parts and percussion

parts. Drum set sounds cannot be selected for the bass

and the Chord 1 through Chord 5 parts.

*2 In addition to its “on” and “oFF” settings, “Part” also has a

“Sol” (Solo) setting, which you can select by pressing the

R-14 (–, +) buttons at the same time while “Part” is

selected. While the “Sol” setting is selected, the Digital

Keyboard will sound only notes of the part that is currently

selected for editing.

• Using the R-17 (u, i) to select a different instrument

part will change “Part” from “Sol” back to “on” or “oFF”.

• Note that “Sol” is a special setting for previewing data

while editing it, and it is not reflected when saving the

user rhythm.

*3 A smaller value shifts the pan position to the left while a

larger value shifts to the right. A value of zero specifies

center.

(3) To exit the mixer, press the C-5 (MIXER) button or

the R-15 (EXIT) button.

• This returns to the [RHYTHM] screen displayed

in step (1).

CTK6200_e.book 30 ページ２０１１年１２月２７日　火曜日　午後８時２０分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Casio WK-6600 Seite 32

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Casio WK-6600

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info