Bedienungsanleitung Casio WK-6600 (Seite 62 von 132) (Englisch)

522439

Zoom out

Zoom in

Vorherige Seite

1/132

Nächste Seite

Music Presets

E-60

Perform steps 1 through 4 of the procedure

under “Chord Progression Editing Flow” on

page E-57.

While holding down the R-13 (FUNCTION)

button, press the C-13 (MENU) button.

This displays a screen like the one shown

below.

Execute the desired menu operation.

In response to the “Sure?” message that

appears, press the R-14 (YES) button to execute

the operation you performed in step 4 or the

R-14 (NO) button to cancel.

• Pressing the R-14 (YES) button starts the process. The

message “Please Wait” will remain on the display if the

process takes time to perform. Do not perform any

operation while this message is on the display.

To perform menu operations

To do this: Do this:

Delete all existing

chords

(Initialize)*1

Use the R-17 (t, y) buttons to move the 0

to “Initialize” and then press the R-16

(ENTER) button.

Key shift all existing

chords

(Key Shift)

1. Use the R-17 (t, y) buttons to move the

0 to “Key Shift” and then press the R-16

(ENTER) button.

2. Use the dial or R-14 (–, +) buttons to

specify how much you want to shift the key.

• You can specify a value from –5 to +6.

3. Press the R-16 (ENTER) button.

Insert another music

preset chord

progression

following the chord

progression data of

the preset being

edited

(AppendChord)*2

1. Use the R-17 (t, y) buttons to move the

0 to “AppendChord” and then press the

R-16 (ENTER) button.

2. Use the dial or R-14 (–, +) buttons to scroll

through the music preset numbers until the

one you want is displayed, and then press

the R-16 (ENTER) button.

Delete existing

chords in a specific

measure

(Delete Measure)*3

1. Use the R-17 (t, y) buttons to move the

0 to “DeleteMeas.” and then press the

R-16 (ENTER) button.

2. Use the dial or R-14 (–, +) buttons to

specify the start measure of the delete

operation.

3. Press the R-17 (y) button to move the

thick brackets (%) to “Size”.

4. Use the dial or R-14 (–, +) buttons to

specify the number of measures you want

to delete.

5. After everything is the way you want, press

the R-16 (ENTER) button.

Insert blank

measures at a

specific location

(Insert Measure)*2

1. Use the R-17 (t, y) buttons to move the

0 to “InsertMeas.” and then press the

R-16 (ENTER) button.

2. Use the dial or R-14 (–, +) buttons to

specify the start measure of the insert

operation.

3. Press the R-17 (y) button to move the

thick brackets (%) to “Size”.

4. Use the dial or R-14 (–, +) buttons to

specify the number of measures you want

to insert.

5. After everything is the way you want, press

the R-16 (ENTER) button.

*1 Deletes all existing chords, and replaces it with four

measures of data with a C-chord at the first beat of the first

measure (user preset initial data).

*2 You will not be able to execute this operation if the number

of measures specified exceeds 999.

*3 You cannot delete all measures. If you specify range that

includes all of the measures, the first measure will remain

without being deleted.

CTK6200_e.book 60 ページ２０１１年１２月２７日　火曜日　午後８時２０分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Casio WK-6600 Seite 62

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Casio WK-6600

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info