Bedienungsanleitung Casio WK-6600 (Seite 67 von 132) (Englisch)

522439

Zoom out

Zoom in

Vorherige Seite

1/132

Nächste Seite

Using the Song Sequencer

E-65

Perform steps 1 through 4 under “To perform

using a music preset” (page E-49).

Press the C-2 (RECORD) button.

• The button will start flashing and the EASY REC screen

will appear on the display.

Start to play something using a music preset.

For details, see “To perform using a music

preset” (page E-49).

• This will start recording, along with Auto

Accompaniment in accordance with the preset chord

progression.

• Starting recording will cause the C-2 (RECORD) button

to change from flashing to lit. During recording, the

display will show the current measure (MEASURE) and

beat (BEAT).

To stop recording, press the L-16 (START/

STOP) button.

• After recording stops, the initial song sequencer mode

screen appears on the display.

• At this time you can press the L-16 (START/STOP)

button to replay what you have just recorded. For

details about playing back recorded content, see

“Playing a Recorded Song” (page E-72).

To exit the song sequencer, press the C-3

(SONG SEQUENCER) button or the R-15 (EXIT)

button.

The simplest use of the song sequencer is to record a

performance as you play it. For details, see “To use EASY

REC to record” (page E-63). Virtually everything you play on

the keyboard can be recorded by the song sequencer.

You also can use the song sequencer to perform multi-track

recording of 17 different tracks and assemble them into a final

song. For example, you can first record a piano track, followed

by a bass track, then a guitar track or tracks that feature other

musical instruments.

A single song can be made up of up to 17 tracks. The 17

tracks are broken down as shown in the table below.

• The Digital Keyboard uses multiple parts simultaneously to

sound Auto Accompaniment, a keyboard layer tone, and

keyboard split tone at the same time. The system track is

used to record the notes of these parts in a single location.

• Tracks 01 through 16 each correspond to a single musical

instrument part. Each track is used to record the notes of

each individual part.

• The parts shown in the table above correspond to mixer

parts. For details, see “Using the Mixer” (page E-38).

• Part B10 is a drum sound only part.

To use EASY REC to record a performance

using a music preset What you can do with the song

sequencer

Songs, tracks, and parts

Song

Track Part

Number Part Contents

System

Track

A04 Auto Accompaniment (Auto

harmonize tone)

A05 Keyboard (UPPER 1 part)

A06 Keyboard (UPPER 2 part)

A07 Keyboard (LOWER part)

A09 Auto Accompaniment

(Percussion part)

A10 Auto Accompaniment

(Drums part)

A11 Auto Accompaniment

(Bass part)

A12 Auto Accompaniment

(Chord 1 part)

A13 Auto Accompaniment

(Chord 2 part)

A14 Auto Accompaniment

(Chord 3 part)

A15 Auto Accompaniment

(Chord 4 part)

A16 Auto Accompaniment

(Chord 5 part)

Track 01

Track 16

B01

B16

Keyboard (B01 part)

Keyboard (B16 part)

CTK6200_e.book 65 ページ２０１１年１２月２７日　火曜日　午後８時２０分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Casio WK-6600 Seite 67

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Casio WK-6600

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info