Bedienungsanleitung Casio WK-6600 (Seite 92 von 132) (Englisch)

522439

Zoom out

Zoom in

Vorherige Seite

1/132

Nächste Seite

Using the Song Sequencer

E-90

You can use the procedures in this section to delete all pitch

bender events from a track or from a specific range in a track.

• To delete individual pitch bender events, perform the

operation under “To delete an individual event” (page

E-85).

• After deleting the pitch bender events in one track from

Track 01 through Track 16, you can overdub new pitch

bender (PITCH BEND wheel (S-1)) operations for that

track. To do so, use the procedure under “To record to

Tracks 01 through 16” (page E-68), and select “OVDB”

(Overdub) for the “RecType” setting in step 6-(3).

• Since “OVDB” cannot be selected for “RecType” when

recording to the system track, you will not be able to

overdub pitch bender operations after deleting pitch bender

events from the system track. You can use the procedure

under “To insert an event” (page E-87) to insert pitch

bender events.

■To delete all pitch bender events in a track

Display the event editor screen of the track

whose pitch bender events you want to delete.

• See “To select a track for editing” (page E-84).

While holding down the R-13 (FUNCTION)

button, press the C-13 (MENU) button to display

the event editor menu.

Use the R-17 (t, y) button to move the 0 to

“DeleteBender” and then press the R-16

(ENTER) button.

• This causes “Delete Bender” screen to appear.

Use the dial or R-14 (–, +) buttons to change the

setting in the thick brackets (%) to “ALL”, and

then press the R-16 (ENTER) button.

In response to the “Sure?” message that

appears, press the R-14 (YES) button to delete

or the R-14 (NO) button to cancel.

■To delete all pitch bender events within a specific

range of a track

Display the event editor screen of the track

whose pitch bender events you want to delete.

• See “To select a track for editing” (page E-84).

If required, you can perform a song playback

operation at this time to check the range you

want to select for deletion.

• See “To play back a song from the event editor screen

(Quick Play)” (page E-84).

While holding down the R-13 (FUNCTION)

button, press the C-13 (MENU) button to display

the event editor menu.

Use the R-17 (t, y) button to move the 0 to

“DeleteBender” and then press the R-16

(ENTER) button.

• This causes “Delete Bender” screen to appear.

Use the dial or R-14 (–, +) buttons to change the

setting in the thick brackets (%) to “Locator”.

• This displays a range specification screen like the one

shown below.

• If you have already specified a range using the locator

screen (page E-73), that range will be displayed on the

range specification screen.

Use the R-17 (u, i) button to move the

cursor, and then use the dial or R-14 (–, +)

buttons to change the value at the cursor

position.

After everything is the way you want, press the

R-16 (ENTER) button.

In response to the “Sure?” message that

appears, press the R-14 (YES) button to delete

or the R-14 (NO) button to cancel.

Deleting Pitch Bender Events

Range start point Range end point

CTK6200_e.book 90 ページ２０１１年１２月２７日　火曜日　午後８時２０分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Casio WK-6600 Seite 92

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Casio WK-6600

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info