Bedienungsanleitung Casio WK-7500 (Seite 159 von 168) (Englisch)

466802

159

Zoom out

Zoom in

Vorherige Seite

1/168

Nächste Seite

Reference

E-157

■Single Type DSP Parameters

01: Wah

This is a “wah” effect that can automatically affect the

frequency using an LFO.

Parameters and Value Ranges:

1 :Resonance (0 to 127)

Adjusts the strength of resonance.

2 :Manual (0 to 127)

Adjusts the wah filter reference frequency.

3 :LFO Rate (0 to 127)

Adjusts the LFO rate.

4 :LFO Depth (0 to 127)

Adjusts the LFO depth.

5 :LFO Waveform (off, sin, tri, random)

Selects the LFO waveform.

02: Compressor

Compresses the input signal, which can have the effect of

suppressing level variation and make it possible to sustain

dampened sounds longer.

Parameters and Value Ranges:

1 :Attack (0 to 127)

Adjusts the attack amount of the input signal. A smaller

value causes prompt compressor operation, which

suppresses the attack of the input signal. A larger values

delays compressor operation, which causes the attack of

the input signal to be output as-is.

2 :Release (0 to 127)

Adjusts the time from the point the input signal drops

below a certain level until the compression operation is

stopped. When an attack feeling is desired (no

compression at the onset of sound), set this parameter to

as low a value as possible. To have compression applied

at all times, set a high value.

3 :Level (0 to 127)

Adjusts the output level.

4 :Threshold (0 to 127)

Adjusts the volume level at which the compression

operation starts.

03: Distortion

Digital distortion that applies an overtone to the input signal

and distorts it.

Parameters and Value Ranges:

1 :Gain (0 to 127)

Adjusts the input signal gain.

2 :Level (0 to 127)

Adjusts the output level.

04: Enhancer

Phase shifts low-range sounds and high-range sounds of the

input signal to enhance the signal’s profile.

Parameters and Value Ranges:

1 :Low Frequency (0 to 127)

Adjusts the low range enhancer frequency.

2 :Low Phase (0 to 127)

Adjusts the phase shift amount of the low-range enhancer.

3 :High Frequency (0 to 127)

Adjusts the high range enhancer frequency.

4 :High Phase (0 to 127)

Adjusts the phase shift amount of the high-range

enhancer.

05: Auto Pan

Performs continual left-right panning of the input signal using

an LFO.

Parameters and Value Ranges:

1 :LFO Rate (0 to 127)

Adjusts the panning rate.

2 :LFO Depth (0 to 127)

Adjusts the panning depth.

3 :LFO Waveform (sin, tri)

Selects the LFO waveform.

06: Tremolo

Adjusts the volume of the input signal using an LFO.

Parameters and Value Ranges:

1 :LFO Rate (0 to 127)

Adjusts the tremolo rate.

2 :LFO Depth (0 to 127)

Adjusts the tremolo depth.

3 :LFO Waveform (sin, tri)

Selects the LFO waveform.

07: Phaser

Produces a distinctive pulsating, broad sound by using an

LFO to change the phase of the input signal and then mixes it

with the original input signal.

Parameters and Value Ranges:

1 :Resonance (0 to 127)

Adjusts the strength of the resonance.

2 :LFO Rate (0 to 127)

Adjusts the LFO rate.

3 :LFO Depth (0 to 127)

Adjusts the LFO depth.

4 :LFO Waveform (sin, tri, random)

Selects the LFO waveform.

DSP Parameter List

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Casio WK-7500 Seite 159

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Casio WK-7500

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info