Bedienungsanleitung Casio xj a130 (Seite 23 von 37) (Englisch)

216276

Zoom out

Zoom in

Vorherige Seite

1/37

Nächste Seite

Projector Basics

E-22

Auto Adjustment of an RGB Image

The projector automatically adjusts vertical and horizontal positioning, frequency, and phase whenever it

starts projecting an RGB signal (following input source selection, power up, etc.). You can also execute

an automatic adjustment operation by pressing the [AUTO] key when the input source is RGB.

NOTE

 When you want to disable auto adjustment and maintain manual settings, you can turn off auto

adjustment by selecting “Off” for the “Option Settings 1  Auto Adjust” setting on the setup menu.

 The projected image may become distorted while an auto adjustment operation is in progress.

 If an image is unclear following the auto adjustment operation, you can use the menu to adjust items

manually.

When the projector is at an angle to the screen it is projecting on, the projected image may have different

length top and bottom edges. This phenomenon is called, “keystoning”. This projector comes with

functions for automatic as well as manual keystone correction, which provides a regularly shaped

projected image.

Important!Important!Important!

 Keystone correction can cause the corrected image to be smaller than the original

(uncorrected) image, or it can cause distortion of the image. If the projected image becomes

difficult to view, try moving the screen and/or projector so they are oriented close to the

configuration shown under “Setting Up the Projector” on page E-14.

 The projector does not support horizontal keystone correction. The center of the projector’s

lens should be aligned with the horizontal center of the screen (page E-14).

Automatic Keystone Correction

When “On” is selected for the “Option Settings 1  Auto Keystone

Correction” setting on the setup menu, the projector will detect the

vertical orientation of the object in the image and adjust its shape

automatically so it appears as a rectangle. The message “Auto

Keystone Corrected.” appears in the center of the projected image

when the projector performs auto keystone correction.

 The projector’s auto keystone correction range is 0 to +30

degrees. If the surface you are projecting onto is angled downwards from horizontal, use manual

keystone correction to correct the image.

NOTE

 Auto keystone correction is performed by detecting the elevation angle of the projector. This means

that the surface you are projecting onto needs to be standing straight up. If the surface you are

projecting onto is not straight, use manual keystone correction to correct the image.

To use manual keystone correction

Press the [KEYSTONE +] or [KEYSTONE –] key.

 This causes the keystone correction screen to appear on the projected image.

2. Use the [KEYSTONE +] and [KEYSTONE –] keys to correct for keystoning.

 Correction can be performed for keystoning within ±30°.

3. To close the setup screen, press the [ESC] key.

Keystone Correction (KEYSTONE)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Casio xj a130 Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Casio xj a130

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info