Bedienungsanleitung Casio XJ-M150 (Seite 10 von 26) (Englisch)

537547

Zoom out

Zoom in

Vorherige Seite

1/26

Nächste Seite

Operating Precautions

E-8

This projector is made of precision components. Failure to observe the following precautions can result

in inability to correctly save data and malfunction.

● Never use or store the projector in the following locations. Doing so creates the

risk of malfunction of and damage to the projector.

● Avoid using the projector under the following conditions. Such conditions

create the risk of malfunction of and damage to the projector.

● Whenever setting the projector down or performing any operation that involves

moving or reorienting it, take care that you do not pinch your fingers under the

projector.

● Never leave a dead battery inside the remote controller for a long time.

A dead battery can leak, which leads to malfunction of and damage to the remote controller.

● Clean with a soft, dry cloth.

When very dirty, use a soft cloth that has been dampened in a weak solution of water and a mild neutral

detergent. Wring all excess water from the cloth before wiping. Never use thinner, benzine, or any other

volatile agent to clean the projector. Doing so can remove its markings and cause staining of the case.

● Missing Screen Dots

Though this projector is manufactured using the most advanced digital technology available today, some

of the dots on the screen may be missing. This is normal, and does not indicate malfunction.

● Never subject the projector to strong impact while it is projecting.

If the projector is accidentally subjected to strong impact, the projection image will momentarily go

blank. The image will reappear after some time, but it may be the wrong color or it may be accompanied

by an error message.

If the projected image is the wrong color, re-select the current input source. If this does not return the

projected image to its proper color, use the procedure under “To turn off the projector” on page E-15 to

turn projector power off and then back on again.

If the image reappears with an error message, correct the problem in accordance with the indicator

explanations under “Error Indicators and Warning Messages” in the User’s Guide on the CD-ROM that

comes with the projector.

Other Precautions

z Locations subjected to electrostatic charge

z Locations subjected to temperature extremes

z Locations where there is extreme moisture

z Locations subjected to sudden temperature changes

z Locations where there is a lot of dust

z On a shaky, slanted, or otherwise unstable surface

z Locations where there is the danger of getting wet

z Avoid areas subject to temperature extremes (operating temperature

range is 5°C to 35°C (41°F to 95°F)).

z Never place heavy objects on the projector or climb on top of the

projector.

z Never insert or allow foreign objects to drop into the projector.

z Never place a vase or any other container of water on top of the

projector.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Casio XJ-M150 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Casio XJ-M150

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info