28595
10
Zoom out
Zoom in
Vorherige Seite
1/78
Nächste Seite
10
Projection Operations
2. Adjust the angle and position of the projector as required so the
projected chart fits within the screen area.
3. Press the [AF/AK] key again.
z This performs auto keystone correction.
Auto Adjustment at Power On
While [Continuous AF/AK] is selected for Option Settings2 J Power On AF/AK Mode (page
60) on the setup menu, turning on the projector automatically enters the pre-focus mode and
projects the alignment chart. Perform the procedure starting from step 2 under Performing
Auto Focus and Auto Keystone Correction while Continuous AF/AK is Enabled above.
z When [AF] is selected for Option Settings2 J AF/AK Mode on the setup menu, only
Auto Focus is performed when the [AF/AK] key is pressed.
z If the message Outside of Auto Focus range. Relocate the projector to change the
distance from the screen, and then press the AF/AK button. appears, try moving the
screen and/or projector so the distance between them is within the auto focus range
(approximately 0.8 to 4 meters). Note that the actual auto focus range will depend on
screen and projector setup conditions, and other factors. When the distance is outside the
auto focus range, use manual focus.
z Note that certain screen and projector conditions, and other environmental factor may
make it impossible to perform auto keystone correction and Auto Focus correctly. In this
case, adjust settings manually.
z Proper Auto keystone correction and Auto Focus are not possible if the projector is not
on a level surface. Make sure you set up the projector correctly, in accordance with the
information under Getting Ready in the Users Guide (Basic Operations).
Manual Keystone Correction
Manual keystone correction can be used to correct for both vertical and horizontal keystoning.
To use manual keystone correction
1. Press the [KEYSTONE] key.
z This causes the keystone correction screen to appear on the projected image.
2. Use the [S] and [T] keys to select either Vertical Keystone Correction
or Horizontal Keystone Correction.
10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Casio XJ560 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Casio XJ560

Casio XJ560 Bedienungsanleitung - Deutsch - 78 seiten

Casio XJ560 Bedienungsanleitung - Französisch - 78 seiten

Casio XJ560 Bedienungsanleitung - Italienisch - 78 seiten

Casio XJ560 Bedienungsanleitung - Spanisch - 78 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info