Bedienungsanleitung Casio XW-P1 (Seite 61 von 96) (Englisch)

585756

Zoom out

Zoom in

Vorherige Seite

1/96

Nächste Seite

Using the Step Sequencer

E-59

Use the

cursor (U, q, w, I) buttons to

move the brackets % or the cursor to the item

whose setting you want to change, and then

use the

minus (–) and plus (+) buttons to

change the selected setting.

•Use

PATTERN to change the pattern number.

• Use the

PART minus (–) and plus (+) buttons to

change the part name.

•Use

STEP minus (–) and plus (+) buttons to

change the step number.

• To return to the previous menu level, press

EXIT.

• The mixer screen shows current settings.

• While the Step Edit screen is displayed, the keyboard

will sound the tone of the currently selected part. The

mixer screen shows the settings of each step (the note,

velocity or value item that is currently being changed).

• On the mixer screen, notes are shown in a specific

position on the screen as C through B, regardless of the

actual octave.

In addition to the changes you can make using the simple

editing procedures (page E-51), you can also do the following.

• Copy settings from another slider

• Scale, drum, velocity slider presets

• Note shift

Press

STEP SEQUENCER.

Hold down

FUNC A/B until a screen like the

one shown below appears on the display.

Press

MENU.

Use the

cursor (U, q, w, I) buttons to

move the item selection cursor (0) to the item

you want and then press

ENTER. The items

available on the screen are described below.

■ Copy: Copies settings from another slider.

Use the

cursor (U, q, w, I) buttons to move the

brackets % to an item and then use the

minus (–) and

plus (+) buttons to change the item’s setting.

• Chord parts can be copied between chord parts only.

• Data being edited (!TEMP) can be specified as a copy

source.

■ Preset: Scale, drum, velocity slider presets

Use the

cursor (U, q, w, I) buttons to move the

brackets [ ] to an item and then use the

minus (–) and

plus (+) buttons to change the item’s setting. Inputting a

slider preset number automatically causes the slide preset

name to change accordingly.

• The following shows the slider preset numbers and their

corresponding slider preset names.

1 Major, 2 Minor, 3 Dorian, 4 Lydian,

5 Mixolydn (Mixolydian), 6 Phrygian, 7 Locrian,

8 M.Minor (Melodic Minor), 9 H.Minor (Harmonic Minor),

10 H.M. 5th (Harmonic Minor 5th), 11 Altered (Altered),

12 WholeTon (Whole Tone), 13 Diminish (Diminished),

14 Pentaton (Pentatonic), 15 M.Penta (Minor Pentatonic),

16 Blues, 17 Kick (Bass Drum), 18 Snare, 19 Hi-hat,

20 Toms, 21 Cymbal, 22 Velocity

• The following are the chord part only slider preset numbers

and their slider preset names.

1 Diatonic, 2 Minor, 3 H.Minor (Harmonic Minor), 4 Velocity

Changing Slider Settings

To copy slider settings from another slider

FUNC A/B button setting

Copy destination pattern name

FUNC A/B button setting

PatternCopy source sequence number

Slider preset name

Pattern name FUNC A/B button setting

Slider preset number

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Casio XW-P1 Seite 61

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Casio XW-P1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info