Bedienungsanleitung Casio XW-P1 (Seite 92 von 96) (Englisch)

585756

Zoom out

Zoom in

Vorherige Seite

1/96

Nächste Seite

Reference

E-90

14: Lo-Fi

Applies various types of noise to the input signal to reproduce

a retro Lo-Fi sound.

Includes wow and flutter for rotational fluctuation like that in

tapes and records, a Noise 1 generator that generates

continual FM radio type, and a Noise 2 generator that

generates record play types scratch noise.

Parameters and Value Ranges:

1 :Wow and Flutter Rate (0 to 127)

Adjusts the wow and flutter rate.

2 :Wow and Flutter Depth (0 to 127)

Adjusts the wow and flutter depth.

3 :Noise1 Level (0, 1, 2, 3, 4, 5) (Param A)

Adjusts the level of Noise Generator 1.

4 :Noise2 Level (0, 1, 2, 3, 4, 5) (Param B)

Adjusts the level of Noise Generator 2.

5 :Noise2 Density (0, 1, 2, 3, 4, 5)

Adjusts the frequency of Noise Generator 2.

6 :Bit (0, 1, 2, 3)

Distorts the sound. A larger number produces greater

distortion.

Important!

Raising the noise level while a note is not sounding will cause

noise to sound, even if there is no input signal.

■ Normal DSP Dual Type DSP Parameters

Dual type DSPs are configured by combining two different

single type DSPs. Use the procedure below to determine what

parameters that can be configured for each dual type DSP,

and the operation, and setting ranges of dual type DSPs.

Example: Type number 29: Distortion-Wah

1. The DSP type name has two parts: a left side part and a

right side part.

Distortion-Wah 3 “Distortion” and “Wah”

2. Find out what parameters you can configure by looking up

the left side part of a dual type DSP in the “Type Name”

column of the table below.

3. Find the same type names in the table under “Normal DSP

Single Type DSP Parameters” on pages E-88 through

E-90, and note the operation and setting ranges of the

items that are the same as those shown in the

“Configurable Parameters” column of the above table.

4. Next, repeat steps 2 and 3 above for the right side part of

the dual type DSP parameter name.

• (Param) in the table under step 2 of this procedure are

parameters assigned to the

8/16 and MASTER sliders

when Hex Layer tones are selected. The (Param) of the

single type DSP whose name is on the left is assigned the

8/16 button, while the single type DSP whose name is

on the right is assigned the

MASTER button.

■ Solo Synthesizer DSP Parameters

• (Param A) and (Param B) are parameters assigned to the

8/16 and MASTER sliders when Solo Synthesizer

tones are selected.

(No number): Bypass

Selecting this option disables application of DSP.

No parameters

01: Auto Pan

Parameters and Ranges

1 :LFO Waveform (Range: sin, tri)

2 :LFO Rate (Range: 0 to 127) (Param A)

3 :LFO Depth (Range: 0 to 127) (Param B)

4 :Manual (Range: –64 to 0 to 63)

02: Distortion

Parameters and Ranges:

1 :Gain (Range: 0 to 127) (Param A)

2 :Level (Range: 0 to 127) (Param B)

03: Flanger

Parameters and Ranges

1 :LFO Waveform (Range: sin, tri, random)

2 :LFO Rate (Range: 0 to 127) (Param A)

3 :LFO Depth (Range: 0 to 127) (Param B)

Type Name Configurable Parameters

Wah LFO Waveform

LFO Rate

LFO Depth (Param)

Distortion Gain (Param)

Level

Chorus LFO Waveform

LFO Rate (Param)

LFO Depth

Flanger LFO Waveform

LFO Rate (Param)

LFO Depth

Reflection Feedback (Param)

Compressor Threshold (Param)

Level

Auto Pan LFO Waveform

LFO Rate

LFO Depth

Manual (Param)

Tremolo LFO Waveform

LFO Rate (Param)

LFO Depth

• In our “Distortion-Wah” example, the left side part of the

name is “Distortion” so we can see in the above table

that “Gain” and “Level” parameters can be configured.

You can find out about the operations and setting ranges

of “Gain” and “Level” by referring to “03: Distortion” on

page E-88.

• The parameter numbers that appear on the parameter

setting screen start from 1, and the number is

incremented for each successive parameter.

The parameter numbers of our “Distortion-Wah” example

would be as shown below.

1: Gain

2: Level

3: LFO Waveform

4: LFO Rate

5: LFO Depth

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Casio XW-P1 Seite 92

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Casio XW-P1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info