634798
29
Zoom out
Zoom in
Vorherige Seite
1/84
Nächste Seite
Caso Standmixer B 1000 29
14.1 Before initial use
1. The device is featured with a safety protection device. The motor does not work when
blades/blade base are not correctly installed.
2. Clean all dismountable parts (refer to "cleaning and maintenance")
3. Please follow carefully overview and assembling
4. Care is needed when handling cutting blades, especially when removing the blade from
the bowl, emptying the bowl and during cleaning.
14.2 How to use
14.2.1 Blending
1. Clean all the parts which will touch the food.
2. Put the raw materials into blender jar, add some water according to personal preference
(but not more than 60 %), then put the blender cover on and put the top cover on the
feeding hole.
3. Insert the plugt into the outlet.
4. Turn the control dial to the desired speed (min – max) for blending.
14.2.2 Function P (pulse)
1. Press and hold the button (P) or press it several times, until the food reaches your
desired consistency. The device is working as long you press the button.
14.2.3 Function CRUSH ICE
1. Fill the jug with ice cubes.
2. Press the button CRUSH ICE, the machine will work discontinuously lasting for 1 min to
make the food reaches your desired consistency.
14.2.4 Function SMOOTHIE
1. Fill the jug with fruits and/or vegetables as well as enough liquid.
2. Press the button SMOOTHIE, the machine will keep working for 1 min to make the food
reaches your desired consistency.
Please note
Don't remove the lid during operation.
This device must not idle nor be overfilled, because the motor will overheat and gets
damaged. Fill the unit up to maximum of 60 percent.
When you want to blend only liquid you can fill the device up to maximum marking.
Do not leave the device unsupervised when it is in operation.
Remove power plug first before pouring out the food.
14.3 Overheat protection
In order to prolong the device’s service life, an overheat protecting unit is installed. If the
motor runs too long or overloaded, the temperature reaches the warning value and the
motor will stop automatically. Pull out power supply plug and wait for the motor to cool
(about 20 to 30 minutes), then use again.
29

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Caso B 1000 - 3610 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info