Bedienungsanleitung Caterchef 688.010 (Seite 22 von 36) (Englisch, Holländisch, Französisch)

530702

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

- 22 -

ENGLISH

HOW TO USE THE X2 PAD

More cooking programs can be stored under the number keys by using the X2 function.

In waiting mode, press X2, any of the number keys, and the Start pad,

you can recall a preset cooking program as follows:

Number/Memory Pads 1234567890

Preset Cooking Time :20 :40 1:00 1:30 2:00 3:00 4:00 5:00 6:00 7:00

X2 function can only program one stage cooking. After setting is ﬁ nished, press Stop/Reset to return to waiting mode.

The oven will start after you touching X2, any of the number keys and then the Start pad. For example, to use the X2

function, and save a program of full power and 3 minutes cooking to number pad 8.

1. Open the door and place food in the oven, close it.

2. Touch PROG once.

3. Touch X2 pad once.

4. Press number pad 8.

5. Press Power Level once.

6. Touch number pads 3, 0, 0.

7. Press PROG to save.

NOTE: When the program has been saved, you can press START to start cooking or you can also

press Stop/Reset pad to cancel.

If you want the oven to start immediately after you touching any of the number keys instead of after you touching the

Start pad, press and hold down Stop/Reset for 5 sec until “P L” appears on display; now you don’t need to press Start

pad after selecting a cooking program by touching any of the number keys.

If you want to cancel the auto-number start setting, you can press and hold down Stop/Reset

for 5 sec until “P PROG” appears on display.

COUNT OF OPERATIONS

You can read the count of how many times the oven has been used. To do this,

1. In waiting mode, press and hold down Stop/Reset.

2. Touch Power Level pad. The number on display shows how many times the oven has been used.

This function is for the user to analyze the usage of the oven and the trafﬁ c ﬂ ow at a particular location where the

oven is being used commercially.

SWITCH

The oven can use single tube or double tubes to cook. For single tube mode, you can save power, while for double

tubes, you can use less time to cook. The default setting for the oven is double tubes, however, you can press Switch

to change. Select it before setting a cooking program.

ADJUST THE COOKING TIME

During cooking, you can press +/- to adjust the cooking time. Each press to adjust 20 seconds. The maximum time

you can set is 1H :99 seconds. For the preset program, you cannot adjust the cooking time by pressing +/-

CHILD PROOFLOCK

In waiting mode, press and hold PROG for 5 seconds. The oven is locked.

To release child lock, press and hold PROG for 5 seconds, the oven goes to normal.

RETURN TO FACTORY SETTING

If you want the oven return to the default factory setting, you can press Start pad and plug in the oven until “00:00”

shows on the screen, then press the following pads one by one:

“1”, “2”, “3”, “4”, “5”, “6”, “7”, “8”, “9”, “0”, “Power Level”, “X2”, “PROG”, “Switch”, “+”, “–”, “stop/Reset”, “Start”.

And the screen will show “00:18”, open and close the door, then open it again.

Beep will be heart to signal to oven is back to factory setting.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Caterchef 688.010 Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info