Bedienungsanleitung Caterchef 688.212 (Seite 25 von 26) (Englisch, Holländisch)

649081

Zoom out

Zoom in

Vorherige Seite

1/26

Nächste Seite

688212 nl en ma 2016

ENGLISH

8. Close the door, the oven will turn back to Ready Mode. If press button during setting process,

the oven turn to Door Open Mode.

The program that not saved will be lost. If there is program saved as memory procedure, press the

related number button, the saved program will start. If no saved program, the buzzer will alarm when

pressing number button and it will not work.

Note:

1. If the electricity is cut off, the saved program will not lost.

2. If the program need to reset, just repeat the above steps.

3. If press

at the last step, it will turn back to Door Open Mode. The setting will be no use.

12. Double Quantity cooking

1. Under ready state, press "X2" button and then press number buttons 0-9 in 5 seconds, the oven will

start cooking with the quantity preset cooking time.

2. Press "X2", "DOUBLE" displays. When press number buttons, LED will display the quantity preset time.

For example, number button "5" and its preset time is 1 minute. Then press "X2", then time will change

to 1:00*(1+0.8)=1:48

3. When cooking program ﬁnish, the oven will enter End of Cook Cycle Mode.

13. Stage Cooking Programming

1. This allows the user to cook food items at combination of various Power Levels.

2. Three stages can be set at most under cooking mode or memory mode. After setting the power and time

for the ﬁrst stage, press

to set the second stage. And the same step to set the third stage.

3. When setting the second or the third stage, press

, "STAGE-2" or "STAGE-3" displays.

4. Press

button to start cooking.

14. Use Option Mode

1. Open the oven door and press "2" for 5 seconds. The buzzer sounds once and enter this mode.

2. LED displays "OP:

−−".

3. Press any number button to enter related mode setting. For example: to set the voice of the buzzer to

medium. Press "2", "OP:22" displays. If you want to change, keep pressing "2",

LED displays "OP:20", "OP:21", "OP:22", "OP:23", "OP:20" .....in cycle.

4. Press

to save the current setting. After saved, "OP:−−" display again.

5. During setting process, press

to enter Door Open Mode. Close the door will enter Ready

Mode.

6. If

button not pressed at the last step, the program cannot be saved but stay at previous way.

15. Service Mode

7. Open the oven door and press "3" for 5 seconds to enter service mode.

8. LED displays "SERVICE".

9. To check the times of closing or opening the door, just press number button "3",

LED will display the times.

10. Press number button "4" in, "4-CLEAR" displays. Press

and "CLEARED" displays,

the message will be cancelled.

11. Press

to enter Door Open Mode. Close the door will enter Ready Mode.

16. Factory-default setting

1. In power up and ready mode, press

and "0" to factory - default setting.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Caterchef 688.212 Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info