649082
28
Zoom out
Zoom in
Vorherige Seite
1/34
Nächste Seite
688217 nl en ma 2016
28
ENGLISH
10. On the Fly Cooking
1. While the oven is cooking, if User Option OP:51 is selected, press number buttons, the preset cooking
program will start automatically.
2. The screen displays the remaining cooking time.
3. When cooking program finish, the oven will enter End of Cook Cycle Mode.
11. Time Defrost Function
1. In Ready Mode, Press "DEFROST" button, screen will display "00.00".
2. Press number buttons to input defrosting time. The maximum time is 99 minutes and 99 seconds.
3. Press
to start defrosting. The default power is power level 20%.
4. The remained cooking time will be displayed. When cooking program finish, the oven will enter End of
Cook Cycle Mode. If you press
button under this mode, the oven will enter Pause Mode.
12. Programming Mode
This mode allows the user to assign cook times and power levels to the once touch button.
1. Open the door and press "1" pad for 5 seconds,
the buzzer will sound once and enter to Programming Mode.
2. "PROGRAM" displays.
3. Setting Program: Press number button to set the program.
2 seconds later, the screen will display the time associate with that number button.
4. Input the time: Press number buttons to input time.
5. Press "POWER LEVEL" button, "% POWER" displays. Press number buttons to select power level you
want, and the corresponding power will light. If you want to choose full power level, press "1" and "0"
successively. Then the screen will display "% POWER". If no power chosen, 100% power is default.
Note: Set the time first, then choose the power.
6. After setting the time and power, press
, the cooking program will be saved.
When the program saved, "PROGRAM" displays.
7. If all the cooking time exceeds the MAX.time User Option 7, when press
to save the program,
the buzzer will sound three times briefly to tell you the time is no use.
And then the screen turn back to display "PROGRAM". The time set before will be no change.
8. Close the door, the oven will turn back to Ready Mode. If press
button during setting process,
the oven turn to Door Open Mode. The program that not saved will be lost. If there is program saved as
memory procedure, press the related number button, the saved program will start.
If no saved program, the buzzer will alarm when pressing number button and it will not work.
For example: set the program as memory cooking.
Power level 70% and cooking time is 1 minute and 25 seconds.
Step 1: Open the door, press number button "1" for 5 seconds, "PROGRAM" displays.
Step 2: Press number button "3", the screen will display "P:03",
After two seconds, the screen will display the related time "00:30".
Step 3: Press number buttons "1", "2" and "5" to input the cooking time.
Step 4: Press "7" button, "1:25 70" displays. Setting finished.
Step 5: Press
to save. When use the program next time, just press "3",
the related program will start.
28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Caterchef 688.217 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info