Bedienungsanleitung Cateye CC-GL11 Stealth evo (Seite 24 von 33) (Englisch)

602323

Zoom out

Zoom in

Vorherige Seite

1/33

Nächste Seite

Introduction

How to install the

unit on your bicycle

Setting up the

computer

How to use the

computer

Others

Changing the

computer con-

ﬁguration

Uploading the mea-

surement data

Setup of your

Changing the

computer con-

ﬁguration

Click on [STEALTH] to change the settings

Before changing the settings, click on [Read] to load the settings of the computer.

Change the settings according to the following procedure.

Setting items Description

Time zone

Select the city code nearest from your current location.

* For details, see “Time zone list” (page 6).

Daylight saving

time

Select whether to use the daylight saving time.

• On : Moves the clock 1 hour ahead.

• Off : Displays in regular clock.

Speed unit Select the speed unit (km/h or m/h).

Night-time

setting

Set the time when the backlight lights up.

• Night Mode On :

Enter the start time when the backlight lights up.

• Night Mode Off :

Enter the end time when the backlight lights off.

(Example) When lighting up from 7:00 pm to 6:00 am

Night Mode On : 19

Night Mode Off : 6

* When you do not want to turn on the backlight throughout the day,

set the same value for both “Night-time setting ON” and “Night-time

setting OFF”.

Setting items Description

Tire circumfer-

ence

This is not used with this unit.

Total distance

You can enter the start value of the total distance, and add the trip

distance to it.

(Setting range : 00000 to 99999)

* This can be used when you renew and/or reset the computer.

* Enter the total distance in integer number only.

Sampling interval

Set the record interval of the measurement data.

* The maximum recording time (total time of all trip data) and the

maximum time for one trip depend on the interval selected.

• 1s (at intervals of 1 second) : 35 hours / 12 hours

• 2s (at intervals of 2 seconds) : 70 hours / 24 hours

• 5s (at intervals of 5 seconds) : 175 hours / 60 hours

Clock display

format

Select the display format of

“12h

” (12 hours display) or

“24h

” (24

hours display).

* Date and clock are acquired from GPS signal; therefore, it is not

necessary to enter them.

Function

display

You can hide undesired functions.

(Check mark: function displayed, No check mark: function hidden)

* Heart rate and cadence cannot be used with this unit.

* Measurement is performed for hidden functions. When a hidden

function is displayed again, its measurement results will be reﬂected.

Middle display

Select the middle display of the measurement screen.

• Clock : Displays the clock.

• Altitude : Displays altitude.

Click on [Apply]

The changes are reﬂected to the computer.

Remove the computer from the cradle. Now, changing the computer conﬁguration is

completed.

Delete the data recorded

in the computer.

Read the current settings of the

computer.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Cateye CC-GL11 Stealth evo Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Cateye CC-GL11 Stealth evo

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info