Bedienungsanleitung Cateye CC-TR100 (Seite 16 von 28) (Englisch)

471843

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

CC-TR100

2928

CC-TR100

MODE-

Auto-mode menu screen

Power select menu screen

MODE-

For the basic information on how to use the

menu screen, refer to page 28.

S/S/E

MODE-

S/S/E

MODE-

S/S/E

Wheel selection

You can choose between two wheels, A and B. The initial value for tire size (circumference) B

is 2050 mm.

NOTE: • Before Wheel circumference, it is necessary to stop the measurement and reset all

measured data.

• Not resetting all measured data causes the “PLEASE rESEt” message to be displayed,

making selection impossible.

Tire circumference input

You can change the tire circumference selected in “Wheel selection” (wheels A or B). You can

view data, but cannot alter it while the bicycle is in motion.

NOTE: • Before tire circumference input, it is necessary to stop the measurement and reset

all measured data.

• Not resetting all measured data causes the “PLEASE rESEt” indication to be dis-

played, making selection impossible.

• Specifying a numerical value outside the setting range causes the “Error” indication

to be displayed, making selection impossible.

Select

Changing numerical values

Digit shift

Select

Wheel selection menu screen

Tire circumference input menu

screen

*1: If you select “on” for Power Select on

the menu screen, the main display

will switch to torque measurement/

power calculation.

*2: This menu is available when the op-

tional download kit and/or power unit

is used.

*3: This menu is displayed when Power

Select and Data Storage are turned on.

Initially, it is not displayed as the de-

fault setting for Power Select is off.

To use these functions, the optional

power unit is required.

*4: To use the data files recorded in this

menu, the optional download kit or

power unit is required.

Tire circumference input

Auto-mode Date

Power select

Cadence zoneHeart rate zoneHeart rate sensor ID

Data file *4

Main display

See page 29 See page 29 See page 30 See page 30

See page 31

See page 32

See page 43

See page 32

See page 39 See page 38 See page 36 See page 34 See page 41

Menu screens at

a glance

Setting clock

Manual odometer input

Speed unit

Defining remote

button setting

See page 31

See page 33

PC Link *2

Torque *2

Data storage *4

See page 42

Sound

Wheel selection

Configuring main unit

When the MENU button is pressed with the Measuring screen displayed, the menu screen appears.

The menu includes a total of 17 screens as shown in the figure below: the main unit settings can be

checked or changed using these screens.

The basic information on how to use the menu screen is as follows:

1. When the Measuring screen is displayed, press the MENU button to switch to “Wheel circum-

ference” of the menu screen.

2. Press the MODE-1 or MODE-2 button until desired menu screen appears.

3. Press the START/STOP/ENTER button to change the settings.

NOTE:

For information on how to change various settings, refer to the relevant page as shown below.

4. When the setting change is completed, press the START/STOP/ENTER button to confirm the

setting and return to the menu screen.

NOTE:

Make sure to press the START/STOP/ENTER button each time the setting is changed.

Pressing the MENU button cancels the setting.

5. Press the MENU button to return to the Measuring screen.

NOTE:

After one minute idle, menu screen will return to the Measuring screen.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Cateye CC-TR100 Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info