Bedienungsanleitung Cateye CC-TR200DW (Seite 9 von 21) (Englisch)

471822

Zoom out

Zoom in

Vorherige Seite

1/21

Nächste Seite

ENG-17ENG-16

ENG

M1/+

SSE

M1/+

SSE

M2/-

SSE

1 Current speed

Displays the current speed.

Updated every second.

2 Cadence

Displays the number of pedal rotations per minute.

Updated every second.

Measurement screen

Upper and middle display data

*1: When the trip distance (DST) exceeds 10,000 km [mile], or the elapsed time (TM)

exceeds 100 hours, [E] appears indicating further measurement is impossible. Clear

the data by resetting (page 16).

*2: This device calculates the average excluding the time when you stop pedaling. This

feature produces actual averages, which are different from those with conventional

models that calculate it for the entire measurement time period.

3 Average speed

Displays the average speed after the start of measurement.

4 Average cadence

Displays the average cadence after the start of measurement.

* The average will not be reflected when you stop pedaling.

5 Maximum speed

Displays the maximum speed after the start of measurement.

Updated independently of starting/stopping measurement.

6 Maximum cadence

Displays the maximum cadence after the start of measurement.

Updated independently of starting/stopping measurement.

Starting/Stopping the measurement

Initially, the unit starts or stops measurement automatically in sync

with the bicycle motion. This is called auto-mode function.

“km/h” or “mph” flashes during measurement.

The total distance, maximum speed, and maximum cadence are up-

dated independently of stating/stopping measurement.

Auto-mode function

When the auto-mode is turned on ( lights up), the unit detects

the wheel spinning, and starts/stops measurement automatically.

When the auto-mode is turned off ( lights off), the unit starts/

stops measurement by using the SSE button.

* For on/off of the auto-mode, see the menu screen “Setting the auto-

mode” (page 31).

* When the transmission is stopped and Sensor signal icons

are off (page 14), the main timer may not start due to speed signal

not responding.

Press the M1/+ or M2/- button to turn on the sensor signal icons

, .

Backlight

Pressing the LT button illuminates the displays for about 3 seconds.

* Pressing any button while backlight is still on extends the illumination

for another 3 seconds.

Resetting the measurement data

To reset the measurement data (TM, DST, Lap Time, C.D. DST, etc)

and the lap data, simultaneously press the SSE button and the

M1/+ or M2/- button in the measurement screen.

* Resetting the measurement data saves the data automatically on a

file. (page 23)

* The screen will freeze for about 2 seconds after resetting; however,

all measurements are operating normally, including the elapsed time.

* The countdown setting (C.D.DST→) is returned to the manu set

value you set.

* Cannot reset for 5 seconds after pressing the LAP button.

Power-saving function

When the computer does not receive any data for 5 minutes, it will

enter the power-saving mode, in which only the date/clock is displayed.

By pressing any buttons except the AC recovers from the power-

saving mode, and the measurement screen appears. You must press

a button when the computer is in power saving mode before it will

start to measure any data.

Power-saving mode

AT icon

(or)

(Simulta-

neously press)

(Simulta-

neously press)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Cateye CC-TR200DW Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Cateye CC-TR200DW

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info