Bedienungsanleitung Cateye CC-TR200DW (Seite 17 von 21) (Englisch)

471822

Zoom out

Zoom in

Vorherige Seite

1/21

Nächste Seite

ENG-33ENG-32

ENG

M2/- M1/+

Setting the target cadence zone

You can set the target cadence zone on/off and change the upper/lower limit of the

target cadence zone.

* Stop measurement and perform the resetting operation (page 16) before you can

change the target cadence zone. Unless you perform the resetting operation, “DATA

RESET” appears on the screen, preventing from changing the target cadence zones.

* For details of the target zone, see “Use of the target zone” (page 34).

1. Press the MENU button in the measurement screen to

switch to the menu top screen.

Switch to the CDC.ZOne screen using the M1/+ and M2/-

buttons, and confirm with the SSE button.

Menu top:

Changing the menu:

M1/+

M2/-

Confirm:

SSE

2. Select on/off of the target cadence zone using the M1/+ and

M2/- buttons.

When using the target cadence zone, select “On”, confirm

with the SSE button, and then proceed to Step 3.

When not using the target zone, select “OFF”, and then

proceed to Step 4.

↔↔

↔ OFF:

M1/+

M2/-

Confirm:

SSE

3. Enter the lower zone limit using the M1/+ and M2/- buttons,

press the SSE button, and then enter the upper limit in the

same way.

Increase/decrease:

M1/+

M2/-

Confirm:

SSE

4. Pressing the MENU button returns to the menu top screen

(CDC.ZOnE screen), and confirm the change.

Pressing it again returns to the measurement screen.

To the menu top/measurement screen:

* You can enter any upper/lower limit; however, the upper limit is adjusted automati-

cally to the lower limit + 1 when the entered lower limit exceeds the upper limit. In

case of the upper limit, vice versa, the lower limit is adjusted in the same way.

2. Enter the target distance using the M1/+ and M2/- buttons,

and move digits using the SSE button.

* The target distance can be set to the 0.1 km.

Increase/decrease:

M1/+

M2/-

Move digits:

SSE

3. Pressing the MENU button returns to the menu top screen

(C.D.DST→ screen), and confirm the change(s).

Pressing it again returns to the measurement screen.

To the menu top/measurement screen:

Setting sound

Switch on/off of the target zone alarm sound and button operation sound.

1. Press the MENU button on the measurement screen to

switch to the menu top screen.

Switch to the SOUnD screen using the M1/+ and M2/-

buttons, and confirm with the SSE button.

Menu top:

Changing the menu:

M1/+

M2/-

Confirm:

SSE

2. Switch between the CDC out of zone alarm and button

operation using the SSE button.

CDC.ALARM ↔ BUTTOn:

SSE

3. Select On or OFF using the M1/+ and M2/- buttons.

↔

OFF:

M1/+

M2/-

4. Pressing the MENU button returns to the menu top screen

(SOUnD screen), and confirm the change(s).

Pressing it again returns to the measurement screen.

To the menu top/measurement screen:

(or)

Target distance

In case of 100.0 km

(or)

(Back)

(or)

(Back)

CDC zone alarm

Button operation

sound

(or)

(Back)

Current setting

Upper limit

Lower limit

(Back)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Cateye CC-TR200DW Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Cateye CC-TR200DW

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info