508111
19
Zoom out
Zoom in
Vorherige Seite
1/51
Nächste Seite
ENG-18
SSE
LT
Starting/Stopping the measurement
The speed unit (km/h or mph) flashes during measurement.
Initially, the auto-mode function which starts or stops measurement automatically in
sync with the bicycle motion is ON. Auto measurement is switched to manual mea-
surement and vice versa by ON/OFF operation in the auto-mode.
* For setting the auto-mode, refer to the menu screen “Setting
the auto-mode” (page 35).
* The total distance, maximum speed, maximum heart rate and
maximum cadence are updated independently of starting/
stopping the measurement.
Auto-mode function (automatic measurement)
When the auto-mode is on ( is turned on), the computer
detects the wheel spinning, and starts/stops the measure-
ment automatically.
* In the transmission-off status where
or is turned off,
the computer does not start the measurement even if you
ride your bicycle. Pay attention when riding after a break.
To recover from the transmission-off status, press the
M1/+ or M2/- button to turn on the sensor icon. For de-
tails, refer to the “Transmission sleep mode” (page 19).
Manual measurement
When the auto-mode is off ( is turned off), use the SSE
button to start/stop the measurement.
• Stop reminder
The stop reminder function reminds the rider with an
alarm incase the stopwatch is forgotten to be stopped
after the ride.
When any signal is not received from the speed sensor
for 90 seconds while counting the elapsed time, an alarm
sounds andSTOP!” appears on the screen. This alert
display is repeated up to 3 times every 90 seconds. When
any sensor signal is detected, the alarm is stopped.
* Failure to stop the measurement tends to happen after you
taking a break during riding, or after you finished a race. Ig-
nore this when you start soon after a break at a traffic light.
* This function cannot be disabled.
Backlight
Pressing the LT button illuminates the displays for about 3 seconds.
* Pressing any button while backlight is still on extends the il-
lumination for another 3 seconds.
Auto-mode icon
Speed unit
Starting/Stop-
ping the manual
measurement
Beep!
19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Cateye CC-TR310TW wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Cateye CC-TR310TW

Cateye CC-TR310TW Bedienungsanleitung - Deutsch - 51 seiten

Cateye CC-TR310TW Bedienungsanleitung - Holländisch - 51 seiten

Cateye CC-TR310TW Bedienungsanleitung - Französisch - 51 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info