Bedienungsanleitung Cateye V2c (Seite 12 von 21) (Englisch)

508115

Zoom out

Zoom in

Vorherige Seite

1/21

Nächste Seite

ENG-23ENG-22

ENG

F-01 F-02 F-03 F-14

• Trip distance

• Elapsed time

• Various average values (average speed, and average cadence)

• Various maximum values (maximum speed, and maximum cadence)

• Date and time of file creation (date/time when the measurement started)

• Number of laps used

• Time distribution to the target zone (time in the zone, time above the zone, and

time below the zone) and the percentage (%)

• Lap data (average lap speed, average lap cadence, maximum lap speed, maxi-

mum lap cadence, lap time, split time, trip lap distance)

*1: One lap per file is used even in the case there is no lap data. Therefore, when the total

number of laps reaches 99 points, no more files can be saved.

Viewing the measurement data in a file

View the measurement data in a file saved in the computer.

1. Press the MENU button in the measurement screen to

switch to the menu top screen.

Press the SSE button on the FILE VIEW screen.

Menu top:

Confirm:

SSE

File view

The lap and measurement data are saved into a file automatically each time a ride is reset

(Resetting Operation page 16)

With the file view, you can review the past rides or delete data recorded.

Measurement data to be recorded in a file

The computer can record up to 14 files

When 14 files (rides) are saved, the oldest one is deleted automatically. The latest file

is always F-01.

The measurement data to be saved in a file are as follows.

Date of creation:

Old

Total number of laps

Total number of files

(Back)

New

M2/-

Changing the computer configuration

Pressing the MENU button in the measurement screen switches to the menu screen.

In the menu screen, you can view and delete the files saved, and view and change various

configurations.

* Use the M1/+ and M2/- to change menu items.

* After changes are made, be sure to review the setting(s) and confirm by pressing the MENU button.

* Leaving the menu screen without any operation for 2 minutes returns to the measurement screen,

and changes are not saved.

Menu top screen

Measurement

screen

M1/+

(Back)

Setting the measure-

ment unit

Changing the measure-

ment unit

(Back)

SSE

(page 30)

File view

Viewing and deleting

files

SSE

(page 23)

Setting the clock/

date

Changing the clock/date

SSE

(page 27)

Wheel selection and

tire circumference

Selecting wheel and

changing the tire cir-

cumference

SSE

(page 28)

Searching the sen-

sor ID

Synchronizing the speed

sensor ID

SSE

(page 28)

Total distance

manual entry

Total distance input

SSE

(page 30)

Setting the auto-

mode

On/off of the auto-mode

SSE

(page 31)

Setting the count-

down distance

Countdown distance in-

put

SSE

(page 31)

Setting sound

On/off of the CDC alarm,

and button operation

sound

SSE

(page 32)

Setting the target

cadence zone

Changing the upper/

lower zone limit

SSE

(page 33)

Continue

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Cateye V2c Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Cateye V2c

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info