Bedienungsanleitung Cateye V2c (Seite 18 von 21) (Englisch)

508115

Zoom out

Zoom in

Vorherige Seite

1/21

Nächste Seite

ENG-35ENG-34

ENG

60 80 100 120 140 160 180 200

rpm

Cadence

CDC.ZONE

80 - 120 rpm

Cadence zone

Default zone

Target training zone

Alarm

ZONE

Trouble shooting

If a malfunction occurs, check the following before contacting CatEye or your retailer for

repair or service.

Trouble on display

Use of the target zone

When the target cadence zone is turned On, cadence is monitored against set zone range.

When the cadence is out of the zone during measurement, the computer sounds an alarm

and notifies a rider by flashing .

For training aiming at a cadence of 80 to 120 rpm, set the lower limit to 80 and upper limit

to 120.

Then, the computer emits an alarm when the cadence falls below 79 rpm, or rises above

121 rpm.

Once the target zone is set to On, the relevant data are recorded to the file and the time in

zone the time in the zone, time above the zone, and time below the zone and their percent-

ages can be viewed in the file view (page 23).

* You can enter any upper/lower limit to the zone.

* For the target zone, you can change on/off and the upper/lower limit of the target zone

from the menu screen “Setting the target cadence zone” (page 33).

* On/off of the alarm sound is selected from the menu screen “Setting sound” (page 32).

Trouble Check Items Remedy

Display motion be-

comes slower.

Flashes on the

screen.

No displays appear.

Meaningless display

appears.

Cannot measure the

trip speed (cadence)

Is the surrounding temperature

low (below zero degree Celsius

or 32 degrees Fahrenheit)?

Temperatures below freezing may re-

sult in slower screen response. Data

is not affected.

The remaining battery ca-

pacity for the computer is

low.

Replace it with a new battery

(CR2032) immediately.

After replacement, be sure to perform

the restarting operation (page 10).

Is the battery for the com-

puter empty?

Replace it with a new battery

(CR2032).

After replacement, be sure to perform

the restarting operation (page 10).

Perform the restarting operation

(page 10).

Have you checked the sensor ID?

Is the computer ID Synch'ed

with somebody else's sensor?

Is the Speed and Cadence

sensor icon on

, ?

Check whether the distance

between the speed (ca-

dence) sensor and the mag-

net is too large.

Is the sensor zone of the

speed (cadence) sensor off

the center of the magnet?

Has the power-saving function

been activated, showing only

date/clock on the screen?

Is the battery for the speed

sensor empty?

Check the speed sensor ID (page 28)

for SP1 (speed sensor 1) or SP2

(speed sensor 2).

If the Speed and Cadence sensor

icon is off

, , the computer can-

not receive data. Press the M1/+ or

M2/- button once to turn on the icon.

Adjust the position of the speed (ca-

dence) sensor and that of the mag-

net correctly. (See “How to install the

unit on your bicycle” on page 6.)

Press any button on the computer

to cancel the power-saving function.

Replace it with a new battery

(CR2032).

After replacement, be sure to press

the RESET button on the speed

sensor.

Continue

Pressing the LT button

does not turn on a light.

Check whether lights

up on the computer screen.

The remaining battery ca-

pacity for the computer is

low.

Replace it with a new battery

(CR2032).

After replacement, be sure to

perform the restarting operation

(page 10).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Cateye V2c Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Cateye V2c

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info