Bedienungsanleitung Cateye V3 (Seite 15 von 23) (Englisch)

508116

Zoom out

Zoom in

Vorherige Seite

1/23

Nächste Seite

ENG-29

ENG

ENG-28

M2/- M1/+

Wheel selection and tire circumference

Switch the Wheel Size (A / B), and change the Tire Size (tire roll out length).

* For the tire size, see “Tire circumference” (page 13).

1. Press the MENU button in the measurement screen to

switch to the menu top screen.

Switch to the WHEEL screen using the M1/+ and M2/-

buttons, and confirm with the SSE button.

Menu top:

Changing the menu:

M1/+

M2/-

Confirm:

SSE

(or)

Wheel selection

Current wheel size

2. Select the Wheel Size “A” or “B” using the M1/+ and M2/-

buttons.

A ↔ B:

M1/+

M2/-

Confirm:

SSE

At this point if change of tire circumference is not necessary,

you can escape the setup by pressing the MENU button.

3. Enter the last 2 digits of the tire circumference for the wheel

selected in Step 1 using the M1/+ and M2/- buttons, and

confirm with the SSE button.

Then, enter the first 2 digits in the same way.

Increase/decrease:

M1/+

M2/-

Move digits:

SSE

4. Pressing the MENU button returns to the menu top screen

(WHEEL screen), and confirm the change(s).

Pressing it again returns to the measurement screen.

To the menu top/measurement screen:

Searching the sensor ID

When moving the computer from one sensor to another or to use a different HR chest

strap, this operation must be performed.

* This unit requires the sensor ID.

The computer cannot receive the sensor signal unless the sensor ID is synchronized properly.

* To synchronize the sensor ID, the heart rate sensor must be worn properly (page 9), and be near

the bicycle with a speed/cadence mounted (page 7).

* When searching the sensor ID, make sure no other sensors are in the area within 10 m radius.

For the Speed/Cadence sensor, it is also possible to press the Reset button on the sensor to

intentionally turn off the signal transmission from the sensor.

(or)

(Back)

M2/- M1/+

Setting the clock/date

Set the “Clock display format”, “Hour”, “Minute”, “Date display format”, “Year”,

“Month” and “Day.”

1. Press the MENU button in the measurement screen to

switch to the menu top screen.

Switch to the CLOCK.DATE screen using the M1/+ and M2/-

buttons, and confirm with the SSE button.

Menu top:

(or)

Hour Minute

(or)

Display format

(Back)

Changing the menu:

M1/+

M2/-

Confirm:

SSE

2. Select the clock display format.

Select “24h (24 hour)” or “12h (12 hour)” using the M1/+

and M2/- buttons, and confirm with the SSE button.

24h

↔↔

↔ 12h:

M1/+

M2/-

Confirm:

SSE

3. Enter the “Hour” or “Minute.”

Enter the “Hour” using the M1/+ and M2/- buttons, confirm with

the SSE button, and then enter the “Minute” in the same way.

Increase/decrease:

M1/+

M2/-

Confirm:

SSE

4. Select the date display format.

Select the date display format from “YY/MM/DD”, “MM/DD/

YY”, and “DD/MM/YY” using the M1/+ and M2/- buttons,

and confirm with the SSE button.

Switch the display:

M1/+

M2/-

Confirm:

SSE

5. Enter the “Year”, “Month” and “Day.”

Enter the “Year”, “Month” and “Day” in the display order

selected in Step 4 using the M1/+ and M2/- buttons, and

confirm with the SSE button. Enter the last 2 digits of the year.

Increase/decrease:

M1/+

M2/-

Confirm:

SSE

6. Pressing the MENU button returns to the menu top screen

(CLOCK.DATE screen), and confirm the change(s).

Pressing it again returns to the measurement screen.

To the menu top/measurement screen:

Continue

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Cateye V3 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Cateye V3

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info