Bedienungsanleitung Cecilware IC-22A (Seite 4 von 11) (Englisch)

615697

Zoom out

Zoom in

Vorherige Seite

1/11

Nächste Seite

HOW DOES YOUR INDUCTION HOB WORK?

A high frequency (20-35KHz) induction coil located underneath the ceramic top plate

heats the cooking pan by magnetic friction. The heat is produced directly within the pan.

It's controlled by an electronic circuit to offer superior performance and functions. During

cooking, no energy is lost between the hob and the food. When you switch it off, the

cooking is stopped immediately.

PRECAUTION BEFORE USING YOUR INDUCTION HOB

1. The glass top is made of strong, hard, and non-porous properties. But, in case of breakage,

even if it's only slightly cracked, disconnect the appliance from the electrical socket immediately

and contact the after-sales service.

2. The appliance is equipped with a Small Object Detector. It's recommended not to place small

metal kitchen utensils such as pan lids, knives, or other metal objects on the induction-heating

zone. If the inductor is switched on, there is a risk of them becoming hot.

3. When using your induction hob, don't place any magnetic sensitive objects on the glass top,

such as credit cards, cassettes, etc.

4. Scientific tests have shown that the induction hob presents no danger for anyone using a

pacemaker. Please keep a 2’ distance from the unit while the induction hob is in use.

5. To prevent from overheating, do not place aluminum foil or iron plate on the top plate.

6. Put the appliance on a horizontal surface but keep away from wall or articles at least 2” - 4”.

7. To prevent an electric shock, do not put articles like iron wire or tools into the air entrance or

outlet.

8. Immediate clean up is recommended when water is left on the top plate.

OPERATION INSTRUCTION

1. Plug power cord into 120V, 60Hz, 15A (IC-18A); 208V, 60Hz, 11A (IC-22A); 240V, 60Hz, 11A

(IC-25A) dedicated electrical circuit.

2. Turn power on by pressing the power on/off button.

3. Rotate the power control knob clockwise. The power level LED will display from level 1 (Min.) to

level 9 (Max.). If you turn past 9 it will start at 1 again. The same applies if you turn back past 1.

4. Put a suitable pan in center of the top plate, and rotate power control knob to desired power

level.

5. Heating Indicator Light indicates if the pan is suitable or not. If the Heating Indicator Light is

on, then the pan is heating. If the Heating Indicator Light is off, it means the power is on, but no

pan or suitable pan is on top plate.

6. This unit is equipped with an Over Heating Protection Device, which stops power temporarily

when top plate temperature reaches 482°F (+/- 10%). The power will start again automatically

when the temperature of the top plate is reduced below 482°F (+/- 10%). By heating an empty

pan, maximum temperature will be reached very quickly. The Heating Indicator Light will flash to

indicate the over heating protection function is on.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Cecilware IC-22A Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info