Bedienungsanleitung Cecotec Conga 1790 vital (Seite 24 von 63) (Deutsch, Englisch, Französisch, Italienisch, Portugiesisch, Spanisch)

753600

Zoom out

Zoom in

Vorherige Seite

1/63

Nächste Seite

4746

ENGLISH ENGLISH

The robot does not return to the charging

base

Remove objects within 3 ft/1 m to the left and

right side and within 6 ft/2 m of the front of

the charging base.

The robot will return quicker to the charging

base when it is close to it. If the robot is far

away from it, it will take longer to detect it.

Clean the charging terminals.

The main brush does not rotate Clean the main brush.

Check if the main brush is properly installed.

The robot movements and routes are

usual.

Clean the sensors carefully with a dry cloth.

Restart the robot by turning the power switch

off and on.

6. TECHNICAL SPECIFICATIONS

Product: Conga 1790 Vital

Product reference: 05471

Output voltage: 19 V DC

Output current: 0.6 A

Power: 40 W

Battery: 14.4 V DC Li-Ion 2600 mAh

100-240 V AC ~, 50/60 Hz

Made in China | Designed in Spain

7. DISPOSAL OF OLD ELECTRICAL APPLIANCES

The European directive 2012/19/EU on Waste Electrical and Electronic

Equipment (WEEE), specifies that old household electrical appliances must

not be disposed of with the normal unsorted municipal waste. Old appliances

must be collected separately, in order to optimize the recovery and recycling

of the materials they contain and reduce the impact on human health and

the environment.

The crossed out “wheeled bin” symbol on the product reminds you of your obligation to

dispose of the appliance correctly. Consumers must contact their local authorities or retailer

for information concerning the correct disposal of old appliances and/or their batteries.

02 4 Main brush error Check if the main

brush is entangled or

blocked and clean it.

Other possible situations

Problem Solution

The robot cannot be activated Make sure the main power switch is in the ON

position.

Make sure the battery is fully charged.

If the problem persists, turn the main power

switch off and restart it.

The robot stops operating suddenly Check if robot is trapped or stuck on an

obstacle.

Check if the battery level is too low.

If the problem persists, turn the main power

switch off, wait for 2 seconds and restart it.

The schedule function does not work Make sure the main power switch on the

bottom of robot is turned on.

Make sure the time, time of day (AM/PM), and

the scheduled time have

been set correctly.

Check if robot’s battery is too low to start

cleaning.

Weak suction power Check if any obstructions are blocking the

suction inlet.

Empty the dust in the tank.

Clean the filters with a vacuum cleaner or a

cleaning brush.

Check if the filters are wet.

Air-dry the filters completely before use.

The robot does not charge Check if the indicator on the charging base

are lighted up. If not, contact the Technical

Support Service of Cecotec.

Clean the charging terminals with a dry cloth.

Check if the robot beeps when it gets to the

charging base. If not, contact the Technical

Support Service of Cecotec.

05471_Conga 1790 Vital_IM_YV_01200611.indd 46-4705471_Conga 1790 Vital_IM_YV_01200611.indd 46-47 12/6/20 14:3312/6/20 14:33

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Cecotec Conga 1790 vital Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info