ENGLISH
13THUNDERBRUSH 520
3. Empty the dust inside the dust tank.
4. Clean the dust tank following the “Cleaning and maintenance” section.
5. Remove the plastic protection lter by turning it anticlockwise. Clean the protection lter
with a cloth or paper and use water if necessary.
6. Remove the HEPA lter by turning it anticlockwise and clean the HEPA lter with a cloth or
paper. If dust is very stuck, wash it with water (do not use soap or detergents).
IMPORTANT: if the HEPA lter is washed with water, allow it to dry for at least 24 hours before
placing it back in its place. Do not expose it to direct sunlight to dry it.
7. Place the HEPA and the plastic protection lter in their place and turn them clockwise in
order to x them.
8. To remove motor-protection lter, turn the back lid anticlockwise and take the lter out.
Tap it gently or use a cloth or paper to clean it. Place the protection lter again in its place,
place the lid and turn it clockwise to close it properly.
Plastic protection
lter
HEPA lter
Motor-protection
lter
5. CLEANING AND MAINTENANCE
• Do not wash any of the device’s parts in the washing machine or dishwasher.
• Do not dry it with an electrical heater.
• Do not use abrasive scouring pads, powders or cleaners to clean the product.
• Use a soft, dampened and clean cloth to clean the product’s outer housing.
• Do not let water enter into the vacuum cleaner.
• Ensure the unit is completely cool and dry before storing it.
