ENGLISH | 5
Care, Maintenance, and Warranty
Your Imager is a precision optical instrument and should be treated with
care at all times. Follow these care and maintenance suggestions and your
Imager will need very little maintenance throughout its lifetime.
• Store the Imager in a dry and clean place.
• Be very careful if using your imager and microscope in direct sun light to
prevent damage to the Imager or your eyes.
• Never point the Imager towards the sun or the sensor can be damaged
and cease working.
• To clean the housing, use a damp cloth and dry immediately.
• Use a good lens tissue to clean the clear glass end (optical surface) of
the Imager.
• If needed, blow off dust with a camel’s hair brush or air blower off the
optical surfaces.
• To clean fingerprints off of optical surfaces, use a lens cleaning agent and
lens tissue available at most photo outlets and when cleaning do not rub in
circles as this may cause streaks or scratches to occur.
• Never disassemble or clean internal optical surfaces. This should be done
by qualified technicians at the factory or other authorized repair facilities.
• Do not disassemble or take apart the Imager or damage can occur.
Warranty
Your Imager has a two year limited warranty. Please see the Celestron
website for detailed information at www.celestron.com.