Bedienungsanleitung Celestron Astro Fi (Seite 6 von 40) (Deutsch, Englisch, Französisch, Italienisch, Spanisch)

667044

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

6 | ENGLISH

Astro Fi TELESCOPE

ALIGNING YOUR ASTRO FI

To take full advantage of your motorized Astro Fi, you must ﬁrst align the telescope with the sky using the Celestron SkyPortal

app. Once aligned, your telescope will automatically locate any celestial object you select on your screen! The telescope

also automatically tracks objects in the sky as the Earth rotates. This keeps objects centered in the eyepiece, and makes it

easy to share views with family and friends.

1. Set up your telescope as you did during the day. Make sure your 25 mm eyepiece are installed. Set the tripod to a

comfortable height and level it. Plug the battery pack into the power port on the telescope.

2. Connect to the “Celestron-xx” WiFi network. Open the SkyPortal app and conﬁrm the time and location on your screen.

This should automatically update from your device, but if it does not, you can go into the app settings and update this

manually. Select the telescope icon at on your screen, then press “Connect and Align”.

The app will now walk you through each step. Simply follow the on-screen instructions.

TAKE YOUR ASTRO FI OUT FOR A SPIN!

Now that your Astro Fi is aligned, the SkyPortal app will guide you through the universe using its interactive planetarium.

Hold your device up to the sky, and you will easily be able to identify bright stars, constellations, planets and deep space

objects outside of our Solar System. SkyPortal will point your telescope at any of these objects. Simply tap the object

on your screen, and select “GoTo.” You can also select the search icon to enter an object name, such as “Orion Nebula”,

“Jupiter”, or “Pleiades.”

ADDITIONAL RESOURCES

How to Contact Celestron

For assistance with this product, please contact our Technical Support department at (310) 328-9560, or you may

contact Celestron Support online by going to our website (www.celestron.com) and clicking on the “Support” tab at the

top of the page. Here, you may search through a comprehensive database of frequently asked questions or submit a

request for assistance.

Written correspondence may be sent to:

Celestron • 2835 Columbia Street • Torrance, CA 90503

WiFi switch on left position

3. Open Celestron Sky Portal and select “Connect to

Telescope”. Arrows will appear on your screen for UP/

DOWN and LEFT/RIGHT. These motions are referred to

as altitude and azimuth, respectively.

4. Use the arrows to move your telescope. A slider will adjust

the motor speed.

Start by pointing at distant terrestrial objects. Locate

something with your StarPointer ﬁrst, then look at the object using the 25 mm eyepiece.

Switch to the 10 mm eyepiece, and notice how it increases the magniﬁcation and decreases

the ﬁeld of view. When you change eyepieces, you may have to readjust the focus slightly to

get the sharpest image.

Fig. 9

Now that you are familiar with your telescope, you are ready to begin observing the night sky!

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Celestron Astro Fi Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info