Bedienungsanleitung Celestron AstroMaster 130 EQ (Seite 22 von 32) (Englisch)

580484

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

Before you can use the setting circles to find objects in the sky you need

to align the R.A. setting circle which is incremented in minutes. The

declination setting circle is scaled in degrees and it is factory set and

should not need any adjustments. On the R.A. setting circle there are two

sets of numbers on the dial – one for the northern hemisphere (top) and

one for the southern hemisphere (bottom).

In order to align the R.A. setting circle, you will need to know the names

of a few of the brightest stars in the sky. If you don’t, they can be learned

by using the Celestron Sky Maps (#93722) or consulting a current

astronomy magazine.

To align the R.A. setting circle:

1. Locate a bright star near the celestial equator. The farther you are

from the celestial pole the better your reading on the R.A. setting

circle will be. The star you choose to align the setting circle with

should be a bright one whose coordinates are known and easy to look up.

2. Center the star in the finderscope.

3. Look through the main telescope and see if the star is in the field.

If not, find it and center it.

4. Look up the coordinates of the star.

5. Rotate the circle until the proper coordinate lines up with the R.A. indicator. The R.A. setting circle should rotate

freely.

NOTE: Because the R.A. setting circle does NOT move as the telescope moves in R.A., the setting circle must be

aligned each time you want to use it to find an object. However, you do not need to use a star each time.

Instead, you can use the coordinates of the object you are currently observing.

Once the circles are aligned you can use them to find any objects with known coordinates. The accuracy of your setting

circles is directly related to the accuracy of your polar alignment.

1. Select an object to observe. Use a seasonal star chart to make sure the object you chose is above the horizon. As

you become more familiar with the night sky, this will no longer be necessary.

2. Look up the coordinates in a star atlas or reference book.

3. Hold the telescope and release the Dec. lock knob.

4. Move the telescope in declination until the indicator is pointing at the correct declination coordinate.

5. Lock the Dec. lock knob to prevent the telescope from moving.

6. Hold the telescope and release the R.A. lock knob.

7. Move the telescope in R.A. until the indicator points to the correct coordinate.

8. Lock the R.A. lock knob to prevent the telescope from slipping in R.A.

9. Look through the finderscope to see if you have located the object and center the object in the finderscope.

10. Look in the main optics and the object should be there. For some of the fainter objects, you may not be able to see

them in the finderscope. When this happens, it is a good idea to have a star chart of the area so that you can “star

hop” through the field to your target.

11. This process can be repeated for each object throughout any given night.

Figure 4-10

Dec. circle at top R.A. circle at bottom

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Celestron AstroMaster 130 EQ Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Celestron AstroMaster 130 EQ

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info