Bedienungsanleitung Celestron CGE Pro 1400 (Seite 41 von 72) (Englisch)

667042

Zoom out

Zoom in

Vorherige Seite

1/72

Nächste Seite

With your telescope set up, you are ready to use it for observing. This section covers visual observing hints for both solar

system and deep sky objects as well as general observing conditions which will affect your ability to observe.

Observing the Moon

Often, it is tempting to look at the Moon when it is full. At this time, the face we

see is fully illuminated and its light can be overpowering. In addition, little or

no contrast can be seen during this phase.

One of the best times to observe the Moon is during its partial phases (around

the time of first or third quarter). Long shadows reveal a great amount of detail

on the lunar surface. At low power you will be able to see most of the lunar disk

at one time. The optional Reducer/Corrector lens allows for breath-taking views

of the entire lunar disk when used with a low power eyepiece. Change to higher

power (magnification) to focus in on a smaller area. Choose the

lunar tracking

rate from the hand control's MENU tracking rate options to keep the moon

centered in the eyepiece even at high magnifications.

Lunar Observing Hints

To increase contrast and bring out detail on the lunar surface, use filters. A yellow filter works well at improving contrast

while a neutral density or polarizing filter will reduce overall surface brightness and glare.

Observing the Planets

Other fascinating targets include the five naked eye planets. You can see Venus

go through its lunar-like phases. Mars can reveal a host of surface detail and one,

if not both, of its polar caps. You will be able to see the cloud belts of Jupiter and

the great Red Spot (if it is visible at the time you are observing). In addition, you

will also be able to see the moons of Jupiter as they orbit the giant planet. Saturn,

with its beautiful rings, is easily visible at moderate power.

Planetary Observing Hints

 Remember that atmospheric conditions are usually the limiting factor on

how much planetary detail will be visible. So, avoid observing the

planets when they are low on the horizon or when they are directly over

a source of radiating heat, such as a rooftop or chimney. See the "Seeing

Conditions" section later in this section.

 To increase contrast and bring out detail on the planetary surface, try using Celestron eyepiece filters.

Observing the Sun

Although overlooked by many amateur astronomers, solar observation is both rewarding and fun. However, because the

Sun is so bright, special precautions must be taken when observing our star so as not to damage your eyes or your

telescope.

Never project an image of the Sun through the telescope. Because of the folded optical design, tremendous heat build-up

will result inside the optical tube. This can damage the telescope and/or any accessories attached to the telescope.

For safe solar viewing, use a solar filter that reduces the intensity of the Sun's light, making it safe to view. With a filter

you can see sunspots as they move across the solar disk and faculae, which are bright patches seen near the Sun's edge.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Celestron CGE Pro 1400 Seite 41

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info