Bedienungsanleitung Celestron EdgeHD 14 (Seite 10 von 21) (Englisch)

667029

Zoom out

Zoom in

Vorherige Seite

1/21

Nächste Seite

1. Center the Moon in the field of your telescope.

2. Focus the telescope by turning the focus knob

until the image is sharp. Make sure the mirror

lock knobs are loosened.

3. Set the shutter speed to the appropriate setting

(see table below).

4. Trip the shutter using a cable release or self

timer.

5. Use your camera's bracketing feature to

automatically change exposure time in order to find the best exposure.

Lunar Phase ISO 50 ISO 100 ISO 200 ISO 400

Crescent

1/2 1/4 1/8 1/15

Quarter

1/15 1/30 1/60 1/125

Full

1/30 1/60 1/125 1/250

The exposure times listed in table 7-1 should be used as a starting point. Always make exposures that are longer

and shorter than the recommended time. Also, take a few photos at each shutter speed. This will ensure that you

will get a good photo.

 This technique is also used for photographing the Sun with the proper solar filter.

Eyepiece Projection

This form of celestial photography is designed for objects with small angular

sizes, primarily the Moon and planets. Planets, although physically quite

large, appear small in angular size because of their great distances. Moderate

to high magnification is, therefore, required to make the image large enough to

see any detail. Unfortunately, the camera/telescope combination alone does

not provide enough magnification to produce a usable image size on film. In

order to get the image large enough, you must attach your camera to the

telescope with the eyepiece in place. To do so, you need two additional

accessories; a deluxe tele-extender (#93643), which attaches to the visual

back, and a T-ring for your particular camera make (i.e., Minolta, Nikon,

Pentax, etc.).

Because of the high magnifications during eyepiece projection, the field of

view is quite small which makes it difficult to find and center objects. To make the job a little easier, align the

finder as accurately as possible. This allows you to get the object in the telescope's field based on the finder's

view alone.

Another problem introduced by the high magnification is vibration. Simply tripping the shutter

 even with a

cable release

 produces enough vibration to smear the image. To get around this, use the camera's self-timer if

the exposure time is less than one second

 a common occurrence when photographing the Moon. For

exposures over one second, use the "hat trick." This technique incorporates a hand-held black card placed over

the aperture of the telescope to act as a shutter. The card prevents light from entering the telescope while the

shutter is released. Once the shutter has been released and the vibration has diminished (a few seconds), move

the black card out of the way to expose the film. After the exposure is complete, place the card over the front of

the telescope and close the shutter. Advance the film and you're ready for your next shot. Keep in mind that the

card should be held a few inches in front of the telescope, and not touching it. It is easier if you use two people

Table 3-1

Above is a listing of recommended exposure times when photographing the Moon at the

prime focus of your telescope.

Figure 3-3 - Accessories for

Projection Photography

T-Ring (Camera

Model Specific)

T-Adapter

Figure 3-2 – T-Adapter for 11/14" Optical Tube

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Celestron EdgeHD 14 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info