Bedienungsanleitung Celestron SkyProdigy 70 - 22089 (Seite 9 von 32) (Englisch)

666994

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

Attaching the Telescope to the Fork Arm

Your telescope optical tube has a built on dovetail mounting bar

used to attach the tube to the fork arm. To attach the telescope

tube (See gure 2-5).

1. Loosen the tube clamp tightening knob.

2. Slide the dovetail mounting bar of the telescope tube into

the fork arm clamp until it touches the positioning stop.

Make sure that the logo on the side of the tube is right side

up when the tube is aligned with the fork arm.

3. Tighten the tube clamp knob by hand to secure the tube to

the fork arm.

Your SkyProdigy is fully assembled and is ready to attach the

accessories.

The Star Diagonal

(For 70 mm and 90 mm Models Only)

The star diagonal diverts light at a right angle from the light path

of the telescope. For astronomical observing, this allows you to ob-

serve in positions that are more comfortable than if you were to look

straight through. To attach the star diagonal:

1. Turn the thumbscrew on the eyepiece adapter at the end of

the focuser barrel until it no longer extends into (i.e.,

obstructs) the inner diameter of the focus barrel. Remove

the protective dust cap from the focuser barrel.

2. Slide the chrome portion of the star diagonal into the eye

piece adapter.

3. Tighten the thumbscrew on the eyepiece adapter to hold

the star diagonal in place.

If you wish to change the orientation of the star diagonal, loosen

the thumbscrew on the eyepiece adapter until the star diagonal

rotates freely. Rotate the diagonal to the desired position and

tighten the thumbscrew.

The Eyepiece

The eyepiece, is the optical element that magnies the image

focused by the telescope. The eyepiece ts either directly into the

focuser (130 mm model) or into the star diagonal (70 mm and 90 mm

models). To install the eyepiece:

For 70 mm and 90 mm models:

1. Loosen the thumbscrew on the star diagonal so it does

not obstruct the inner diameter of the eyepiece end of the

diagonal.

2. Remove the protective dust cap from the star diagonal’s

barrel.

3. Slide the chrome portion of the low power 25 mm eyepiece

into the star diagonal.

4. Tighten the thumbscrew to hold the eyepiece in place.

To remove the eyepiece, loosen the thumbscrew on the star

diagonal and slide the eyepiece out.

For 130 mm model:

1. Loosen the thumb screw on the eyepiece adapter at the end

of the focuser barrel and remove the protective dust cap

from the focuser barrel.

2. Slide the chrome portion of the low power 25 mm eyepiece

into the eyepiece adapter.

FIGURE 2-8

VISUAL ACCESSORIES FOR THE SKYPRODIGY 130

Eyepiece

Focus

Knob

Focus Knob

FIGURE 2-6

VISUAL ACCESSORIES FOR SKYPRODIGY 70

Eyepiece

StarPointer

Finderscope

Star

Diagonal

Focus Knob

FIGURE 2-7

VISUAL ACCESSORIES FOR SKYPRODIGY 90

Eyepiece

StarPointer

Finderscope

Star

Diagonal

FIGURE 2-5

Dovetail

Mounting Bar

Tube Clamp

Tightening Knob

StarPointer

Finderscope

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Celestron SkyProdigy 70 - 22089 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Celestron SkyProdigy 70 - 22089

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info