Bedienungsanleitung Chacon 34949 (Seite 2 von 28) (Englisch, Holländisch, Französisch, Portugiesisch, Spanisch)

664851

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

Pet Immune PIR Motion Sensor

The Motion Sensor is designed for use on interior walls and is set to Home Mode

by default. Whenever the Sensor detects movement (while the alarm is armed) you

triggered and the Control Panel Internal Siren will sound immediately.

LED flashes once

when movement

is detected

Tamper Switch

The Tamper Switch (a black button with a silver spring at the top, located inside this

Sensor) is used to indicate an unauthorized attempt to remove its cover.

Whenever this button is released, it will trigger an alarm and the push alert will

notify you which Sensor has been triggered on tamper.

Low Battery Indication

If the LED indicator blinks once per 3 second, the battery must be replaced.

Working Mode

Test Mode

The Sensor enters a 1 minute settling down period on power up, thereafter entering

into Test Mode. In Test Mode, the Sensor detects movement every 10 seconds and

emits an alarm signal every time movement is detected. Test Mode will remain

active for 3 minutes, thereafter entering into Power Saving Mode.

Note: You may also enter Test Mode by pressing the Test Button at the back of the Sensor.

Power Saving Mode

If the Sensor detects movement twice within 3 minutes the Sensor will automatically

enter into Sleep Mode and no movement will be detected. The Sensor will leave

Sleep Mode after a 3 minute period without any movement.

Sleep after detecting human movement twice.

Case 1:

Initial start and then arm.

3 minutes later

No human movement within 3 minutes

Switch from sleep to arm.

Case 2:

Press the test button and then arm.

Pairing New Accessories to the Control Panel

There are two ways of pairing Accessories to the Control Panel – manually and via

App.

Manual Pairing

To pair Accessories manually please follow the instructions below:

Remote Control and Sensors:

1. Press the Learn button at the back of the Control Panel

2. Press any button on the Remote Control or trigger the Sensor

Very Important: Please note that pressing the Tamper Switch instead of triggering

the Sensor will register it as a 24 Hour Zone.

(Optional Accessory) Wireless Siren:

1. Press the Learn Button on the Siren

2. Arm the Control Panel via the App

Pairing from the App

To pair the Accessories via App, open the AW1 Alarm App, go to ‘Edit Accessories’

and follow the instructions on the screen.

WiFi Setup

Step One: Download the App

The App can be downloaded from the App Store or Google Play by searching for

“AW1 Alarm”.

Step Two: Power On

1. Remove the back cover from the Control Panel.

2. Connect the Power Adapter.

3. Set the Power Switch to “ON”.

4. Wait until the WiFi Indicator starts to blink (approx. 30 seconds)

Note: The Control Panel will emit a short ‘beep’ every 3 seconds when powered up. After 30

sta tus

Step Three: Connect the Control Panel to the Router

Important: AW1 does not support WiFi of 5GHz band, If dual-band(5GHz and

2.4GHz) router is used, make sure to connect with the 2.4GHz WiFi instead of the

5GHz's. Make sure your smartphone is connected to the local WiFi network and

then follow the steps in the App to connect the AW1 Control Panel to the Router.

1. Press and hold the [WiFi] Button inside the Control Panel for 3 seconds, the

Control Panel will emit one ‘beep’.

2. Tap [WiFi] in the [Settings] of your smartphone, and select the ‘WiFi Alarm’

network.

3. Return to the App and key in your WiFi name and password or open the drop

down menu to scan for all the nearby wireless networks.

4. The Control Panel will beep once, wait until the WiFi indicator and the Status

indicator stop blinking, indicating that the Control Panel has successfully connected

to the network.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Chacon 34949 Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info