Bedienungsanleitung Chal-Tec 10005142 GPS Tracker 102-B (Seite 17 von 19) (Deutsch, Englisch)

776544

Zoom out

Zoom in

Vorherige Seite

1/19

Nächste Seite

5.13 Data Load

5.13.1 Current date Load: Send SMS: “load+ password” to tracker device, it will reply: “load ok” if the device

is working well under GPRS mode; if not, it will reply “load fail! Please check gprs” that means device does

not work under GPRS mode.

5.13.2 Specified date Load： Send SMS: “load+ password+ space+ year month date” to tracker device, it

will reply: “load ok” and load the tracking data to the monitoring platform upon the valid time you choose.

For Example: send SMS: “load123456 20110425” to the tracker device, means to load the tracking data of

25th April 2011 to monitoring platform.

5.14 Geo-fence

Set up a geo-fence for the unit to restrict its movements within a district. The unit will send the message to

the authorized numbers when it breaches the district.

5.14.1 Set up: When the unit stays immobile in a place for 3-10 minutes, the user can Send SMS

stockade+password+space+latitude,longitude; latitude,longitude to unit to set the restricted district. In case

of breach, it will send SMS “stockade!+geo-info” to the authorized numbers.

Remark: The first latitude&longitude is coordinate of the top left corner of the Geo-fence, while the second

latitude&longitude is the coordinate of the bottom right corner. It will alarm one time in each setting.

5.14.2 Cancel: Send SMS nostockade+password to deactivate this function.

This function will be out of effect after the unit moves outside the district.

5.15 Movement alert

5.15.1 Set up: When the unit stays immobile in a place for 3-10 minutes, the user can send SMS

move+password to the unit, then the unit will reply “move ok!”. In case of such a movement（the unit

default distance is 200M）, it will send SMS “Move” along with a Geo-info to the authorized numbers. It will

alarm one time in each setting.

5.15.2 Cancel: Send SMS nomove+password to deactivate the movement alert.

Remark: This function will be out of effect after the unit moves outside the district.

5.16 Overspeed alert:

5.16.1 Set up: Send SMS speed+password+space+080 to the unit (suppose the speed is 80km/h), and it

will reply “speed ok!”. When the target moves exceeding 80 km/h, the unit will send SMS speed+080!+Geo-

info to the authorized numbers. It will alarm one time in each setting.

5.16.2 Cancel: Send SMS nospeed+password to deactivate the overspeed alert

Remark: It is recommended that the speed alarm is set at not less than 50km/h. For below that rate, it may

cause the excursion of the GPS signal influenced by clouds etc.

5.17 SOS button

Press the SOS for 3 seconds, it will send “help me!+ Geo-info” to all the authorized numbers every 3

minutes. It will stop sending such a SMS when any authorized number reply SMS “help me!” to the tracker.

5.18 Low battery alert

It begins to alert when it is 3.7V and sends you SMS in 3m interval.

SMS format: low battery+Geo-info.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Chal-Tec 10005142 GPS Tracker 102-B Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info