555430
9
Zoom out
Zoom in
Vorherige Seite
1/48
Nächste Seite
8
Assembly
STEP 4 Install the belt
1. Pull the belt around the idler pulleyand toward the trolley. The ribbed side mustcontactthe
pulley.
2. Hook the trolleyconnector into the retaining sloton the trolley asshown (Figure 1).
3. With the trolley against the screwdriver,dispense the remainder ofthe beltalong the rail
lengthtoward the motor unitand around the sprocket (Figure 2).The sprocket teeth must engage
the belt.
4. Check to make sure the belt is nottwisted. Connect the trolleythreaded shaftwith the master link
(Figure 3).
l
Push pins ofmaster link bar through holes in end of beltand trolley threaded shaft.
l
Push master link cap over pinsand past pin notches.
l
Slide clip-on spring over cap and onto pin notchesuntil both pins are securely locked in
place.
5. Remove the spring trolley nutfrom the threaded shaft.
6. Insert the trolleythreaded shaftthrough the hole in the trolley.
HARDWARE
Master
Link
Threaded Shaft with Spring Trolley Nut
Trolley Connector
Figure 1
Retaining
Slot
9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Chamberlain LW5000EV wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info