Bedienungsanleitung Charnwood Skye 5 (Seite 5 von 24) (Englisch)

694420

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

OPERATING INSTRUCTIONS

Congratulations on becoming the owner of a Charnwood Skye

Stove. Your stove has been approved in smoke control areas to burn

wood logs if it is used in accordance with these instructions. It is very

important that you read and understand these instructions before

using the stove.

Before lighting the stove check with the installer that the work and

checks described in the Installation Instructions have been carried

out correctly and that the chimney has been swept, is sound and free

from any obstructions. The stove is not suitable for use in a shared

flue system.

Remember that the stove will be hot and that it is made from hard

materials – ensure that you have good balance before operating the

fire. Always use the provided operating tool and gloves.

Do not use an aerosol spray on or near the stove when it is alight.

There is a risk of explosion or flash ignition of the spray.

When using the stove in situations where children, aged and/or infirm

persons are present a fireguard must be used to prevent accidental

contact with the stove. The fireguard should be manufactured in

accordance with BS 8423:2002.

The stove is suitable for intermittent operation.

FUEL

Please pay careful attention to the special points made with each

type of fuel as they will help you to get the best from your stove. It

must be remembered that only authorised fuels and wood logs may

be burnt in smoke control areas on this stove. If you are not sure

whether you are in a smoke control area, please check with your

Local Authority.

At first you may find it helpful to try several fuels to find the most

suitable. If you are unable to obtain the fuel you want, ask your

supplier, or an approved fuel distributor, to suggest an alternative.

Authorised Mineral Fuels

Authorised mineral fuels may be burned in smoke control areas on

this appliance. Your local fuel supplier or stove shop will be able to

advise you which fuels are available locally. A list of authorised fuels

can be found at:

https://smokecontrol.defra.gov.uk/fuels.php

Take care to only burn good quality fuels in order to obtain the

greatest efficiency and to maintain the life of the appliance.

WOOD LOGS

Only dry well seasoned wood should be burnt on this appliance as

burning wet unseasoned wood will give rise to heavy tar deposits in

the stove, on the glass and within the chimney. For the same reason

hard woods (such as Ash, Beech and Oak) are better than soft

woods (such as Pine and Spruce). Burning wet unseasoned wood

will also result in considerably reduced outputs. The wood should be

cut and split and then left to season in a well ventilated dry place for

at least one year but preferably two years before use. Approximate

suitable log sizes are:

Skye 5, 290mm(11in) long and 75mm (3in) diameter

Skye 7, 400mm (16in) long and 75mm (3in) diameter

Log moisture content of less than 20% is recommended.

PETROLEUM COKE IS NOT SUITABLE FOR USE ON THIS

APPLIANCE. ITS USE WILL INVALIDATE THE GUARANTEE.

This stove is not designed to burn household waste.

HETAS Ltd Appliance Approval only covers the use of Wood Logs

and Smokeless Fuels on this appliance.

MULTI GRATE

Your Charnwood Skye is fitted with a multi grate to enable wood

or smokeless fuel to be burned and ash to be cleared. The grate has

two positions:

1) In the solid fuel position the grate bars are vertical with gaps in

between allowing the primary combustion air to come up through

the grate and through the fuel bed.

2) In the wood position the grate bars are horizontal, allowing the

combustion air to come round the sides of the grate and over the top

of it. When in the closed position ash is able to build up on the grate

as is necessary for effective wood burning.

Movement of the grate from one position to the other is effected

using the operation tool supplied as shown in Fig.1.

The grate is put into the solid fuel position by turning the operation

tool anticlockwise and pulling out the fuel selection slider shown

in Fig.1. The grate is put into the wood position by turning the

operation tool clockwise. To riddle the appliance the tool should be

moved between the clockwise and anticlockwise positions several

times. When burning wood the ash should be allowed to build up

and riddling should only be carried out once or twice a week.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Charnwood Skye 5 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Charnwood Skye 5

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info