4
CHAP. II Préparation avant le départ
!" ,!-./%'0"%+-1-./%2)3 ,!'3".'%&outside(%(continued)
The clean water tank is filled through an external orifice
marked by a specially identifiable pictogram to distinguish
it from the fuel tank on your basic vehicle.
Any covers or plugs on air intakes or orifices on all
household appliances should be removed.
Blanking pieces for the refrigerator grills are supplied as
an option by your sales outlet.
The WC cassette also needs to be put into service by
adding a dose of the appropriate chemical without
forgetting to add little water.
This operation is done through the outside door (access
flap), but can also be done very easily from inside the
living compartment.
When you have finished all operations outside your
camping car, you can start the operations to be done
inside the living compartment.
% !" ,!-./%'0"%+-1-./%2)3 ,!'3".'%&-.#-4"(5
The first thing to do is to switch on the electrical circuit on
the control panel.
Check that the water pump is working and purge any air
in the circuit, for example by carefully opening the kitchen
taps. All air is purged when water starts flowing. Do the
same thing for the cold water and hot water circuits which
are independent.
Air also needs to be purged in the gas circuit. Open the
cylinder in the outside compartment, then open the red
supply valves to the various appliances. Purge by opening
the heater supply valve and switching the gas on. You will
know that there is no more air in the circuit when it starts
working (flame). Repeat the operation for each device
that uses gas.
Your preparation operations will be finished when the
water and gas are both working. Please refer to chapter
XI for operation of each appliance.
PLEASE NOTE5 more detailed information from the
manufacturer of each of these devices is supplied with
the vehicle.
