24
Operation of appliances
LCD
?
LOW VOLTAGE CONTROL
An electronic device cuts off all 12V power supplies when the service battery drops to the minimum voltage of 10V.
It is possible to manually re-establish functioning for roughly one minute by shutting off the overall power switch and turning it on again.
The refrigerator, the electrical step-plate and the functions supplied directly by B2 (unit battery) are excluded from this arrangement.
If the overall power button is not lighted (off), this means that the service battery is disconnected from the installation and can be
recharged only with the engine running.
!CONTROL AND INSTRUMENTATION PANEL MODEL PC 150 TR
!FUSES distribution box “ds300-tr
1 5A fuse to give power to the awning
light, it depends on the awning
button and it switches automatically
off when the engine is started.
2 10A fuse to give power to the water
pump; it depends on the pump
button.
3 10A fuse to give power to the heating/
boiler; it depends on the main button
ON/OFF.
4 10A fuse to give power to the lights
group “A”, it depends on the lights
button.
5 20A fuse to give power to the lights
group “B”, it depends on the lights
button.
6 30A fuse to give power to 12V
AES or 3-way function fridge. The
3-way function fridge switches
automatically off when the engine is
off.
7 20A fuse for the auxiliary power
supply (limiting the charge of solar
regulator); it depends on the main
button ON/OFF, auxiliary 1.
8 20A fuse for the power to the
electric step, main ON / OFF button,
auxiliary 2, heating.
9 3A fuse for the gas power supply
(fridge, kitchen, boiler valve, etc..),
it depends on the main button ON/
OFF.
10 3 A fuse for OUT D+ simulated exit
protection.
