Bedienungsanleitung Chauvin Arnoux PEL105 (Seite 2 von 78) (Englisch)

747192

Zoom out

Zoom in

Vorherige Seite

1/78

Nächste Seite

Thank you for purchasing a PEL 105 power and energy logger.

For best results from your instrument:

read these operating instructions carefully,

comply with the precautions for use.

Denitions of the measurement categories

Measurement category IV corresponds to measurements taken at the source of low-voltage installations.

Example: power feeders, meters and protection devices.

Measurement category III corresponds to measurements on building installations.



Measurement category II corresponds to measurements taken on circuits directly connected to low-voltage installations.

Example: power supply to domestic electrical appliances and portable tools.

PRECAUTIONS FOR USE

This instrument is compliant with safety standard IEC 61010-2-30, the leads are compliant with IEC 61010-031, and the current

sensors are compliant with IEC 61010-2-032, for voltages up to 1,000V in category IV.



installations.

 The operator and/or the responsible authority must carefully read and clearly understand the various precautions to be taken

in use. Sound knowledge and a keen awareness of electrical hazards are essential when using this instrument.

 Use only the leads and accessories supplied. The use of leads (or accessories) of a lower voltage or category limits the voltage

or category of the combined instrument and leads (or accessories) to that of the leads (or accessories).

 Before each use, check the condition of the insulation on the leads, housing, and accessories. Any item of which the insulation

is deteriorated (even partially) must be set aside for repair or scrapping.

 Do not use the instrument on networks of which the voltage or category exceeds those mentioned.

 Do not use the instrument if it seems to be damaged, incomplete, or poorly closed.

Use only the mains power unit supplied by the manufacturer.

 Use personal protection equipment systematically.



If the instrument is wet, dry it before connecting it.

The instrument cannot be used to verify the absence of voltage in a network. For that, use the appropriate tool (a VAT) before

doing any work on the installation.

 All troubleshooting and metrological checks must be performed by competent and accredited personnel.

WARNING, risk of DANGER! The operator must refer to these instructions whenever this danger symbol appears.

Equipment protected by double insulation. Earth.

USB. Ethernet (RJ45).

SD card. Mains plug.

Useful information or tip.

The product is declared recyclable following an analysis of the life cycle in accordance with standard ISO 14040.

The CE marking indicates conformity with European directives, in particular LVD and EMC.

The rubbish bin with a line through it indicates that, in the European Union, the product must undergo selective disposal

in compliance with Directive WEEE 2002/96/EC. This equipment must not be treated as household waste.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Chauvin Arnoux PEL105 Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info