Bedienungsanleitung Chicco Baby Control Audio Digital Compact (Seite 22 von 148) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch, Schwedisch, Finnisch)

500881

Zoom out

Zoom in

Vorherige Seite

1/148

Nächste Seite

2.2 Parent Unit (primarily in receiver mode)

2.2.1 Power:

type AAA batteries (13) (included) or by switch-

ing mains adaptor 100-240V ~ 50/60Hz / 6V,

500mA.

WARNING: Rechargeable batteries must only be

recharged using the mains adaptor (1) supplied

in the pack.

WARNING:

- The mains adaptor (1) cable and carry strap (14)

must be kept out of children’s reach at all times.

They can constitute strangulation risks.

- Inspect the mains adaptors (1) periodically; if

the power cable or the plastic parts of the mains

adaptor are damaged, do not use them and con-

tact an Artsana SpA’s qualiﬁed expert.

- Never leave the adaptors (1) connected to the

mains when the devices are not in use and/or not

connected to the adaptors themselves.

2.2.2 User Instructions – Switching on and Ad-

justments

- ON/OFF button on the parent unit (primarily in

receiver mode) (2).

Press the ON/OFF button (2) for around 2 sec-

onds to turn the parent unit (primarily in receiver

mode) ON. Do not press the button for longer

otherwise the parent unit may not switch on.

Press it again for around 2 seconds to turn the

parent unit (primarily in receiver mode) OFF.

• Volume adjustment button + - (3).

Press the button toward “+” to increase the vol-

ume by one level.

Press the button (3) toward “-” to decrease the

volume by one level.

The unit will beep each time you increase or

decrease the volume level. When the volume

reaches its maximum or minimum levels, it will

beep twice.

The device stores the selected and previously used

volume level in its memory bank.

Note: The device has 8 volume levels. The factory

default sound level is 5.

• Voice activated mode or continual transmission

mode switch (8)

If the switch is set to “OFF”, the two units will op-

erate in continuous transmission mode

If the switch is set to “ON”, the child unit will

operate in voice activated mode; the speaker (6)

on the parent unit (primarily in receiver mode)

will only switch on when it picks up sounds from

the child unit (primarily in transmitter mode) mi-

crophone (5), and will then switch off after a few

seconds if no sound is received.

• Talk-back button to activate the parent-baby

“TALK” option (9)

Press this button (9), to switch the parent unit

from receiver mode to transmitter mode and

communicate with the baby through the inte-

grated microphone (7).

This will simultaneously switch the child unit

(primarily in transmitter mode) from transmission

to receiver mode. The loudspeaker (6) on the child

unit will automatically reproduce the voice trans-

mitted from the parent unit.

On releasing the button (9), the parent unit

switches back to receiver mode (its primary func-

tion) and the child unit automatically switches

back to its primary transmission function mode.

• Portable option for the parent unit

The parent unit is ﬁtted with a carry strap (14)

which makes it practical to carry around.

2.2.3 Luminous and acoustic operating status

indicator

The 2-coloured LED (5) provides 3 different types

of information:

• power ON indicator and correct connection to

the child unit indicator; The 2-coloured LED (5)

is green.

NOTE. If the parent unit is not able to establish a

connection with the child unit or the connection is

lost, the 2-coloured LED (5) is green and will blink

twice every second until it re-establishes a con-

nection. Moreover, after 10 seconds it will beep

twice a second.

• Rechargeable battery (13) low battery indica-

tor: the 2-coloured LED (5) is red and blinks twice

every second and it will beep once a second. If

you wish to continue using the device, it is recom-

mended to charge the rechargeable batteries (13),

otherwise the device will stop working.

Charge the batteries using the mains adaptor

supplied in the pack (1), the warning signal will

be disabled.

Rechargeable battery charge status indicator (13):

the 2-coloured LED (5) is RED.

When recharging is complete, the 2-coloured LED

(5) will switch OFF if the parent unit is OFF whilst

recharging; it will go GREEN if the parent unit is

ON whilst recharging.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Chicco Baby Control Audio Digital Compact Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info